[KR23]

Hi to everybody,
problem solved with the "restore factory settings"...easier solution than I thought!🙂

 

[Rafafv]

Friend, you're awesome. Hope we can get an updated firmware soon. Thanks a lot!

 

[ZuZ]

Well my friend IF you READ the .txt WARNINGS which is for the 2021 Mazda CX-9 and 2021 CX-5 ONLY for NA (USA ONLY at this stage until vehicle roll out in EU), these cars have the .kwi layout and look same as the new Mazda 3 and CX-30, BUT the Files are NOT the same, IF you looked closely, the BP and DM Mazda's take NA01, these new 2021 take NA03 and yes other numbers are similar but NOT the same.
WHY, well becasue from a diagnostic point of view and All the cars Operating Systems these 2021 CX-5 and CX-9's use a COMBINATION of old Mazda IDS (Ford system) and the new MDARS (Bosch system), so Dealers MUST use MDARS for all Connect issues and Mazda IDS for everything else. Plus these two 2021 CX's have a 10.5 inch screen.

So until I hear differently DO NOT Install the NA03 .kwi in ANY Mazda 3 or CX-30, stay with NA01 or EU01 in Germany's case.

New CX-5 2021 owner here, however the screen is 8 inch, and the software installed is the old Mazda connect. Can I use the NA03 to update to the new Mazda Connect II ?

 

[ASH8]

New CX-5 2021 owner here, however the screen is 8 inch, and the software installed is the old Mazda connect. Can I use the NA03 to update to the new Mazda Connect II ?

NO

 

[ZuZ]

NO

Thank you I was wondering if I'll ever get the Connect II for this hardware. For some reason I thought it might be the Connect 1.5.

 

[Matumbo_UA]

[QUOTE = "KR23, сообщение: 2503039, участник: 559714"]
Всем привет,
проблема решена с помощью "восстановления заводских настроек" ... решение проще, чем я думал!!
[/ QUOTE]
Взаимодействие с другими людьми
Thank you friend! Tell me in more detail in which menu to restore the factory settings?

 

[Scooter_ua]

[QUOTE = "KR23, сообщение: 2503039, участник: 559714"]
Всем привет,
проблема решена с помощью "восстановления заводских настроек" ... решение проще, чем я думал!!
[/ QUOTE]
Взаимодействие с другими людьми
Спасибо тебе друг! Подскажите поподробнее в каком меню восстановить заводские настройки?

Excuse me bro, but he will not answer you according your language, only English friend, only.
But I will give an answer to you and repeat into Ukrainian language.
You must enter to settings, going down and then find restore factory settings and follow instructions.
Ти повинен зайти в системні налаштування, потім спуститися вниз та знайти відновлення заводських налаштувань та слідувати інструкціям авто.
🖖

 

[Matumbo_UA]

I still reset the settings. Unfortunately, this did not solve the problem, in place of Polish I now have English without the ability to change. Have thoughts what to do?

 

[Brentm]

There seems to be little revised firmware releases for the connect II system; considering some small bugs. What versions do people have on recently delivered vehicles? I'm located in Australia, so we have the AU and EU versions of the firmware.

 

[Pieter]

After software update version 100047 there is no more message to hold the steering wheel.
See Mazda 3 manual 2019 page 4 -149 for description.
Mazda 3 Dutch manual see page 4 - 183
Is this also noticed by others after updating software version 100047 ?

NOTE.
If you take your hands off the steering wheel (not holding the steering wheel), the warning sound is activated and an alert is indicated on the multi-information display and the active driving display. Multi-information display Active driving display If the steering wheel is held lightly, or depending on the road conditions, the system determines that you have released the steering wheel (not holding the steering wheel) even if you are holding it, and an alert is indicated on the multi-information display and the active driving display.

 

[ASH8]

Are you making an observation or complaining about the change...sorry, but the world is now full of whiners.

As I see it YES, it is a good thing,
Yes you must hold steering wheel with TWO hands ad Grip it.
Mazda's are not self driving and I hope they never will be as I will never own any car that is, THAT is part of the pleasure of Driving, if one wants something or someone else to drive take a taxi or UBER.

 

[Brentm]

After software update version 100047 there is no more message to hold the steering wheel.

Yes I have noticed this as well, not a problem as I continue to hold the steering wheel to drive. It does still alert you, but it appears the timeout for this has been extended, either by design or unintentional error.

 

[da2el]

Are you making an observation or complaining about the change...sorry, but the world is now full of whiners.

don't be sorry, you did not create the firmware, you just made it available
please keep doing it and people must take the risk
possible flaws would come by updating at home or at the dealer

 

[snowball]

I noticed that latest version available from ASH8 for the Mazda3 is 11012 but my new '21 turbo Mazda3 has 11016 installed. And the one under the '21 folder is 11022 but is apparently only for the CX5 and 9.

 

[perseus]

deleted

 

[Pieter]

My Mazda 3 Skyactiv X Luxury got update from 10047 to version 10049 today, does anyone know what improvements / changes have been made with this version?

 

[MatthewGrey]

My Mazda 3 Skyactiv X Luxury got update from 10047 to version 10049 today, does anyone know what improvements / changes have been made with this version?

This has been around for a while now:

HiDrive

my.hidrive.com

Next time check the forum signature of ASH8.

 

[Euphonique]

Any news about a European update? We are a way behind the other versions.

 

[ASH8]

MAZDA only releases an update about once a year, unless some serious issue.
Production car line cars will always have a Later Version, it is up to Mazda IF and when it is released.

 

[Euphonique]

MAZDA only releases an update about once a year, unless some serious issue.
Production car line cars will always have a Later Version, it is up to Mazda IF and when it is released.

Thanks Ash8 for the explanation.