2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
1 - 20 of 888 Posts

·
Super Moderator
Joined
·
507 Posts
Discussion Starter · #1 · (Edited)
283287


HOME SCREEN for .kwi FIRMWARE SHOWN ABOVE

CONNECT UPDATE FIRMWARE 7th Gen from 2019~ onward,
Message me for your private download link only, Inc your Mazda's Model, Year, your Country.

ALL DETAILS UPDATED BELOW from July 18th, 2022.


File Description example for North America market.
CMU 7000C0A-NA03 11048
  • CMU = Unit
  • 7000C0A-NA03 = Model ID
  • 11048 = Software Version
NEXT Generation (2019 ~) Genuine Mazda CONNECT Firmware is here...
EU** is for Europe, UK, Australia, New Zealand.
NA** is for North America, USA, Canada, Mexico.
4A** is for GENERAL R.H.D - L.H.D, Except Hong Kong and Macau.
HK** is for Hong Kong and Macau.

These SINGLE .kwi File are ONLY for Mazda 3 (BP) and Mazda CX-30 (DM) MX-30 (DR) CX-50 (VA) , CX-60 (KH) also specific 2021~ CX-5 and CX-9.
Can Not
be used in the Original Mazda/MZD Connect of 2014-20xx or 6th Generation model.

NOTE:
You can not rename the downloaded new File whatsoever.
You can not have ANY other file or files or folders on your flash drive to do install.
CX-60~ uses USB 'C' Flash Drive port (Can not use any USB 'A' adapters).

You must only have the correct ONE single .kwi file on a FAT32 ( < 32 GB) Flash Drive, file CAN NOT be in a .zip or .rar format... ONLY in a .kwi format.

IF still having issues of CMU not seeing USB Flash Drive do a full format clean of Drive.
Put a small <16GB USB Drive in Windows 10 PC, go to Start, This PC, RIGHT Click on the Drive, Select Format.., Select FAT32, Select Start, click OK, all files on Drive will be Deleted and Drive Re-Formatted (cleaned).
Copy and Paste new Firmware file ONLY on Drive, remove from PC and try in your car again.

IF you are using any MacOS PC to download file then that will also corrupt your Flash Drive as Macs adds hidden files onto flash drive and car CMU will not see the .kwi file.


MAZDA ONLY supports MS-Intel Windows 10 64bit OS and is used by all car makers for Diagnostic and Maintenance UPDATES in their Automobiles.
Apple (Mac) systems is not supported or used by any car brands in Service Departments or for Diagnostics, period.


CMU_7000C0A-NA01_12002.kwi * NON Turbo Engine. Mazda3 and CX-30 Built BEFORE July 1st 2021.
CMU_7000C0A-NA02_11036.kwi * MX-30 Only.
CMU_7000C0A-NA03_11040.kwi * CX-5 + CX-9 2021 on with 10.3 inch center display.
CMU_7000C0A-NA04_12002.kwi * TURBO ENGINE Mazda3 + CX-30 TURBO Built before July 1st 2021.
CMU_7000C0A-NA05_11014.kwi * CX-50 (VA) North America ONLY.
CMU_7000C0A-NA06_12012.kwi * Mazda3 and CX-30 Turbo Built AFTER July 1st 2021 to present also with TCU (Telematics Communication Unit).

CMU_7000C0A-EU01_11000.kwi * Mazda3 and CX-30.
CMU_7000C0A-EU02_11028.kwi * MX-30 Only.
CMU_7000C0A-EU03_10028.kwi * CX-5 + CX-9 with 10.3 inch center display.
CMU_7000C0A-EU06_12004.kwi * Mazda3 and CX-30 from VIN 300001 ~ .
CMU_7000C0A-EU07_14004.kwi * CX-60 (KH) with 12.3 inch center display.

CMU_7000C0A-4A01_10047.kwi * Only have this version.

CMU_7000C0A-HK01
_1***.kwi Do not have any copies.


The NA** file is for North America ONLY.
The EU** file is for Europe/UK/Australia and New Zealand.
The 4A** file GENERAL R.H.D - L.H.D except Hong Kong and Macau.
The HK** file is for Hong Kong and Macau.

Do this to find out what Version NUMBER is running in your car now..
1. Turn the ignition to ACC or ON.
2. Select ”Settings” on the Home screen.
3. Select “System Setting”.
4. Select “System Information”.
5. Select “Version Information”.
6. See 'System Software': version number eg,10016 or 12001, etc
If your cars NUMBER is Below those for your Country and Car Model shown above then you can UPDATE to a later and better version.
No, I do not have Changelogs for every update change.

YES, I CAN SUPPLY YOU ONE (1) OF THE ABOVE .kwi FILES TO UPDATE YOUR MAZDA CONNECT, BUT IF YOUR CAR MODEL ALREADY HAS A HIGHER NUMBER (11000, 10028, 10047, etc) THEN I CAN NOT HELP YOU AS YOU CAN ONLY INSTALL A HIGHER VERSION THAN WHAT IS ALREADY PRESENT IN YOUR MAZDA.
NOTE THE VERSIONS: LIKE NA01, NA05, EU02, EU03, 4A01, HK01 AS THESE ARE FOR SPECIFIC COUNTRY and REGIONS Only, YOU CAN NOT MIX or CHANGE COUNTRY and MODEL TYPE from your cars ORIGINAL FACTORY INSTALL.


I WILL ONLY REPLY TO A PRIVATE MESSAGE, DO NOT ASK IN THIS THREAD.
I CAN NOT COACH YOU ON HOW TO UPDATE IF YOU DO NOT POSSESS OWN ABILITY TO DO SO...EASY INSTRUCTIONS INCLUDED within DOWNLOAD.

* NOTE:
File Versions Above are ONLY for all new Mazda 3 (BP) and CX-30 (DM), MX-30 (DR), 2021~ CX-5 (KF), CX-9 (TC), CX-50 (VA), CX-60 (KH) with Home Screen Pictured Above.

ONLY Use the Correct Firmware for your Region and Car Model and or Engine Type.

*SEE How To .PDF in POST #3.
If your MAZDA has a Higher Package Number right now (meaning a Newer Firmware Version) THEN YOU CAN NOT INSTALL ANY OLDER or OUTDATED VERSIONS.

NEWS: On page 20 of this thread (my Browser) is a long list of FAQs for latest ''MAZDA CONNECTED SERVICES'' and explanation in regard to the MyMazda App
version 6.0.0 or higher for your Phone, INCLUDING REMOTE STARTING OF CAR (for Auto Trans Models Only)...MODEL MUST HAVE FACTORY DELIVERED TCU and Mobile Data Access through your Telco, not for all Models and or all Countries.
 

·
Super Moderator
Joined
·
507 Posts
Discussion Starter · #3 · (Edited)
REGION CODES,.
for new Mazda CONNECT 7th Generation Only....


NA**
is...
Region NORTH AMERICA -
USA, Canada, Mexico, Puerto Rico.


EU** is...
Region EUROPE, UK - ADR.
Albania, Andorra, Austria, Belarus, Belgium, Bosnia, Bosnia Herzegovina, Bulgaria, Croatia, Czech, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Ireland, Israel, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Portugal, Poland, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom, Vatican.
Australia, Christmas Island, Fiji, Indonesia, Kangaroo Island, Malaysia, M-East, New Zealand, Oceania, Papua New Guinea, Philippines, Qatar, Saudi, Singapore, South Africa/Africa, South America (Most of), Asia (Not Japan or China), Tasmania, Thailand.

4A** is..
GENERAL RHD AND LHD, Except Hong Kong and Macau.

HK** is..
HONG KONG AND MACAU.

NOTE: Mazda from about mid 2020 is also now using EU** versions in vehicles now imported into Australia and NZ which used 4A*. It is a consolidation as these cars are now emissions and feature aligned with Europe.

* NOTE file is also MODEL and Or ENGINE Type Specific.
01 is for Non Turbo Engine Mazda 3 and CX-30.
02 is for MX-30 plus is also OTA updated where applicable.
03 is for 2021~ CX-5 + CX-9.
04 is for TURBO Engine Mazda 3 + CX-30.
05 is for CX-50.
06 is for Turbo Engine Mazda 3 and CX-30.
07 is for CX-60.


To Verify what Version NUMBER is running in your car right now..
1. Turn the ignition to ACC or ON.
2. Select ”Settings” on the Home screen.
3. Select “System Setting”.
4. Select “System Information”.
5. Select “Version Information”.
6. See 'System Software': version number eg,10016 or 12001, etc
If your cars NUMBER is Below those for your Country and Car Model shown above in first Post # 1 then you can UPDATE to a later and a better more stable version.
No, I do not always have Changelogs for every update change.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

What version do I INSTALL?
Check your cars Connect Screen FIRST to see which
Version Number is in your car right Now.

If your Mazda is Brand NEW and already has a
Higher or a Later iteration Number than LISTED
here then there are No Updates Available Yet.

Voice recognition malfunction after firmware update??, do this..
MICROPHONE CHECK AFTER FIRMWARE UPDATE.

1. Press 'Talk/Pick-up Button on the steering wheel
2. Confirm that the voice recognition starts command "say a command" is played back.
3. If the command is not read, please remove the negative battery terminal (for data reset) and reconnect it after a few minutes
4. Turn the ignition to ACC or ON with the push button start.
5. Press and hold the Volume/Mute button, then press and hold the Music and Favorite buttons at the same time for 3-5 seconds,
the Diagnostic Test Screen will appear.

6. Select End Diag Mode for CMU reset
 

·
Super Moderator
Joined
·
507 Posts
Discussion Starter · #8 · (Edited)
When you say “BP Mazda 3” what is the BP !?
BP is the MODEL CODE of the car...and is part of the cars VIN (Number).

Mazda worldwide uses this 'code' to itentify what model, Parts Departments also.

The old model Mazda 3 was the BM and BN.

One before that Mazda 3 was BL.

Mazda 2 is a DJ and DL

CX-3 is DK.

Some trivia, car makers don't usually use the O (letter) as in computers/data O letter gets mistaken for number 0, Same applies to letter I (i) as it can be mistaken as a 1.
 

·
Super Moderator
Joined
·
507 Posts
Discussion Starter · #9 · (Edited)
I’m little bit scared about update my infotainment system. I don’t know if is the right file for Canadian version ...
What is the file in the car now, seriously Read what is says.

IF your FIRMWARE is a Lower Number then it is outdated, and up to you if you update at your own risk.

IF your Firmware is the EXACT SAME Number then you don't update...no reason to.

IF your Firmware Number is Higher than listed ABOVE then YOU DO NOT UPDATE...

Pretty simple really.

Changelogs are not available at the moment, same applies to fix bugs like ANY Firmware Update.
If anyone does not understand this then they should not touch their car.:nerd:
 

·
Registered
Joined
·
31 Posts
Thanks for the last message :) the update change nothing visible at this moment. The annoying voice on the GT is still there :( I check my VIN number before and it’s ok :)

I talk with Mazda about the voice when opening this door and the guy tell me that Mazda works with Panasonic at this moment for this problem
 

·
Super Moderator
Joined
·
507 Posts
Discussion Starter · #11 · (Edited)
CMU FIRMWARE UPDATE FOR MY 2022 Mazda 3 and CX-30.

ONLY FOR EU/UK SPECK MODELS OF CX-30 and MAZDA 3.
New Version of Mazda Connect Firmware
7000C0A-EU06 12004.kwi Use ONLY for cars
VIN Last 6 DIGITS starting from
300001 ~ Onwards...

IF YOUR MAZDA 3 or CX-30 VIN Numbers LAST 6 Digits Start with a 3 then YES
you should check your FIRMWARE Version and IF its NUMBER is BELOW EU06_12004 like
11022 or 11069 or similar then YES you should Update Firmware yourself or tell your Mazda Dealer that your Mazda Connect is having the following USER Issues like...

SYMPTOMS
The following changes have been made or the symptoms can be solved by the latest software (Ver. 7000C0A- EU06_12004).

(Ver. 7000C0A- EU06_12004)
• DTC U3000:49 is stored which may be accompanied with following symptoms.
  • No sound comes out from the speakers.
  • Audio source selection is unavailable.

IF YOU WISH TO UPDATE MAZDA CONNECT YOURSELF I CAN SUPPLY YOU A ''DOWNLOAD LINK'' FOR THE GENUINE FIRMWARE DOWNLOAD Ver. 7000C0A- EU06_12004) and the easy Installation Directions, Please ONLY Message me as links WILL NOT be publicly posted in this thread or in any Forums.
When you message me tell me the Model, current Firmware Version number and Country.

Rectangle Font Material property Slope Parallel
 

·
Super Moderator
Joined
·
507 Posts
Discussion Starter · #15 ·
Please tell me how to unzip this file(.kwi).
HUH...

WHY do you ask about unzip file?
DID you Combine all at once to download, YOU SHOULD download, 1 (one) file at a time.

IF your file is a .zip, you need to extract it with Winzip or other program, or download the .kwi file ONLY again, one file at a time.

ONLY .kwi on Flash Drive.
Check Hashsum.
 

·
Registered
Joined
·
3 Posts
Thanks for the last message :) the update change nothing visible at this moment. The annoying voice on the GT is still there :( I check my VIN number before and it’s ok :)

I talk with Mazda about the voice when opening this door and the guy tell me that Mazda works with Panasonic at this moment for this problem
Did you ever use the navigation system? The voice stopped telling me the speed limit once I used it
 

·
Registered
Joined
·
31 Posts
Thanks for the last message <img src="http://mazda3revolution.com/forums/images/smilies/smile.gif" border="0" alt="" title="Smiley" class="inlineimg" /> the update change nothing visible at this moment. The annoying voice on the GT is still there <img src="http://mazda3revolution.com/forums/images/smilies/frown.gif" border="0" alt="" title="Sad" class="inlineimg" /> I check my VIN number before and it’️s ok <img src="http://mazda3revolution.com/forums/images/smilies/smile.gif" border="0" alt="" title="Smiley" class="inlineimg" />

I talk with Mazda about the voice when opening this door and the guy tell me that Mazda works with Panasonic at this moment for this problem
Did you ever use the navigation system? The voice stopped telling me the speed limit once I used it
You have the GS or GT ? This problem is only certain GT. I’m not using the SD card so the voice is not talking. I’m waiting for Mazda update.
 
1 - 20 of 888 Posts
Top