I have some part numbers as I order the inserts at my local dealer. Also in Canada. They don't carry these blades, but they can easily order. Your dealer doesn't want to because they make more off the whole blade assembly.

FYI these are for a 2015 GS sport (hatch back). It should be the same for you but I have no way to confirm.

Fronts (not sure which is right or left):
BHS8-67-333
BBP2-67-333

Rear blade (for hatch):
E112-67-333

 

Thanks very much.
I'll try & track some down with those numbers.

 

Best of luck. I know these clowns don't make it easy. I probably have some spares in my garage right now if you need anything else off the labels. I like to keep some spare parts on hand

 

I had to change the rear blade on my car today as the rubber insert was falling apart. I just went down to Advanced Auto, bought a cheap 12" blade and swapped out the insert.......not about to wait on the dealer to find a "genuine Mazda Part".

 

The rear insert is very narrow, 6mm (.235"). Are most other 12" blades that thin?
A friend of mine said he buys 24" blades when they're on sale then takes out the rubber & cuts it down to length.

 

I heard it's tough replacing the rear wiper blade and still keep stock functionality.

If anyone has tips..let's hear them.
CK

 

That's lies and slander. I've done it 3 times already. Its just a little tricky to slide the new one in but far from impossible. Just note how its sitting in there before you pull the old one.

Unless you're speaking of swapping the entire wiper blade assembly. I get those and the inserts confused.

 

This is a direct replacement for the rear hatch blade. The picture doesn't show, but it's exactly the same as stock. Denso is an OEM supplier for many Japanese cars so I wouldn't be surprised if this is what comes factory from Mazda.

amazon.com/gp/product/B00NPZSMH0

Or if you just want to replace the rubber insert this will work as well:

amazon.com/gp/product/B00BFDJIWM

I usually change my wipers once a year and have used both parts above with no issues.

 

@Deuce_2, Thanks!

 

Just about everybody has gone to replacement blades instead of inserts, which is probably why your dealer only carries blades. As for replacement blades, they can be obtained almost anywhere (auto parts stores, Wally World, etc.).
The hatch wiper needs the plastic part which covers the window base/attachment point temporarily removed. Until it is removed, the arm will not move away from the window far enough to replace the blade. It isn't hard; just spread it far enough to take it off.

 

Funny, I thought I replaced that rear insert without removing the plastic cover 3 times now. Maybe I was mistaken.

By the way, it pops up on a hinge by hand....

 

Check out this website https://www.mazdapartsprime.com/ I have been using them for over a year now for all my O.E. parts they come right from dealerships there super cheap and fast getting me my parts.

 

Been using these on the front without any issues:

www.amazon.com/gp/product/B00O2IPYHA

Using this insert on the rear wiper, works perfectly fine:

www.amazon.com/gp/product/B00BFDJIWM