2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 21 Results
  1. 2014-2018 Mazda 3 Skyactiv Discussion
    I have the 2017 hatchback. Went to the dealer to buy the rubber inserts for all 3 wipers but they don't carry them (at least not at THAT dealership). 3 new OEM wiper assemblies are over $75.00 CDN. Does anyone have part numbers or links to OEM or aftermarket blade inserts? Thanks for any help.
  2. 2014-2018 Mazda 3 Skyactiv Discussion
    My front wiper inserts lasted for 9 months and my rear insert lasted 13 months while parking the car outside. How long do your wiper inserts last?
  3. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    I haven't seen anybody post anything about painting the ugly black plastic around the fogs. Has anyone done this yet? I think it would look a lot better with a glossy black to blend in better with the paint. It's the only part of the front end that is ugly in my opinion. Anyone have...
  4. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    I haven't even had this car for two weeks, and yet, somehow, there is an abrasion on the driver's side control panel on the carbon fiber. It astounds me, because I haven't put anything in the "pocket" near it and baby the car. I don't even think I did this--it might have been there prior to...
  5. 2014-2018 Mazda 3 Skyactiv Discussion
    Does anyone know where to get replacement wiper blade inserts that work with the OEM arms? I want to keep using the original arms since they look classy and I don't mind dealing with metal inserts, but I can't find anything online or even what sizes they should be. I see PIAA has wiper refills...
  6. 2010-13 Mazdaspeed 3 Suspension & Handling
    Great just when I was gonna buy a RMM now I see that people are getting the inserts instead. Anyone have these in? Or any feedback. What I want to accomplish is to get rid of the klunking from shifting mostly and smoother as well. I know there are multiple RMM too. So just look for the one that...
  7. Mazda 3 Parts - Buy / Sell
    Installed and removed, they have zero miles on them. Reason for selling is unacceptable vibration with automatic transmission. Recommended for manual transmission owner to purchase these. Asking $30 with free shipping. Please email me if interested.
  8. Diode Dynamics
    Went ahead and checked out this sponsor after not seeing much about them/by them. I ended up ordering a cup holder insert for my car, and my friends Subaru LGT (without any pictures of what the product even looks like!). I figured I would post up a picture of what it looks like. I went with the...
  9. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Anyone used these? Will these work for a 2012 model hatch? The one for the Trunk/Hatch is what concerns me with fitment problems. Opinions? Mazda 3 6 Carbon Fiber Steering Wheel Emblem Insert | eBay Mazda RX 8 Blk Carbon Fiber Hood or Trunk Emblem Insert | eBay
  10. 2010-2013 Mazda 3 & Skyactiv Discussion
    Did some searching but the only thread I brought up had a dead link. I am interested to see how hard it is to remove the fog light honey comb inserts and the grill on my 2013 i touring. Do I have to remove the whole bumper to remove these pieces? I don't know much about my mazda but I am eager...
  11. Mazda 3 Parts - Buy / Sell
    These where on my girls 08 mz3 auto. Ran for 1k miles. She didn't like the vibrating. These work best on a MT mz3. Will fit to my knowledge 08-13 mz3 excludes speed3. The inserts are just dirty with grease grim or what ever u wanna call it. Helps reduce motor movement. Asking price is $20...
  12. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Part # 20 in the image below is flat black on all the '12 and '13 models, except the GT apparently where it's a gloss or piano black. I'm looking to change mine over to the later, however, I can't find an actual part number for it. Can anyone help me out?? I know someone on here has done...
  13. 2010-2013 Mazda 3 Engine and Performance
    Hey everyone, Just wanted to post my initial thoughts on the CS motor mount inserts. First off the install is fairly simple, CS gives very basic instructions that detail what bolts are to be undone (total of 5) with the use of a 17mm and I believe a 14mm. Proper torque specifications are given...
  14. 2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Well today I had the rear sway bar installed ( with the proper bushings this time ) along with the motor mount inserts and the front strut tower bar. The car drives totally different. I can definately feel the vibration others have said they felt and like it says in the intruction manual. Also...
  15. Mazdaspeed 3 Parts - Buy / Sell
    I bought this along with my SRI but I never opened it because I was still considering the CP-E motor mount...and now I've decided to get that. So selling these for $30 shipped.
  16. 2010-13 Mazdaspeed 3 Engine and Performance
    Im going to order my corksport cai so I figured id just add the inserts to the order if that was the way to go. Would these be my best option or is replacing the whole mount a better option? Thanks
  17. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    what do you think? Finished front and rear door inserts with silver Katzkins vinyl.
  18. 2010-2013 Mazda 3 Engine and Performance
    I went to the CORKSPORT wesite and thought about ordering the motor mounts but I am not sure how many I need for a MAZDA3 2.5L sedan? It says i have quantity 1 but how many do I need at 35.00 usd each?
  19. Mazda 3 Parts - Buy / Sell
1-19 of 21 Results