[rixm6]

It’s a good option to have , I did it over month ago and now I cant live without that

 

[rixm6]

Can you share your ASBuilt modifications please ?

I think it's same like Mazda6
change
7200417BF0570B4204A
72004182845F0BF0665
72004230000BF095066 (lim&mrcc)

and of course 7200401 chekcsum

 

[rixm6]

In Europe theres a Multidot LCD for the normal IC like the one of the Mazda 6 for non Grand Touring models.

unfortunatly not in new 2017 model. I just installed to my new 2018 Mazda6 MRCC and it works but I dont't see anything - ic don't show nothing. seems to be need change IC to 2015 model or current Luxuriy with ADdisplay

 

[rixm6]

Did you try changing the as-build and enable show digital cruise control ?

it's enabled but ic is not multidot display

 

[rixm6]

BAEK-67-XA1C and yes it works

 

[rixm6]

Update
Cars wit auto hold no need

Controller or Unit Stop Lamp
K123-67-YA0
X 1

Is included with this models

I dont have autohold but I also dont need this unit and wiring. Brake lights going on when MRCC decelerate. I needed radar ,stay, short cord, emblem.

 

[rixm6]

Last question

This switch work fine?

Or need change to

Enviado desde mi iPhone utilizando Tapatalk

Need change to bottom one - upper works but you can’t change distance

 

[rixm6]

Next week I try make a good guide
I no make any changes for MRCC, only need add DRSS and CC with MRCC and LIM
Is very easy changes


Enviado desde mi iPhone utilizando Tapatalk

Not very easy, do you have radar calibration tool? Need change 3rows in IC and overall checksum

 

[rixm6]

DRSS on row 720-04-17
CC MRCC LIM on row 720-04-23
Other row?
and global check row 720-04-01

A friend have this tool

https://mazda3revolution.com/forums/2275730-post15.html

 

[rixm6]

You have active 1 to 145KM/H MRCC?


Enviado desde mi iPhone utilizando Tapatalk

not yet

 

[rixm6]

for 2016 it will need a few more parts. on -2016 you need the VCI module

sry wrong information. before 2015 model with tomtom navi screen need VCM - after 2015 with screen ontop dashboard no need VCM

 

[rixm6]

I connected all wires directly to fbcm connectors - can hi/lo, ignition and ground.

 

[rixm6]

today install all parts and only need calibration

this is line for correct configuration for CX-5 2018

7200417BF0572B4204C
7200418600F00BF0677


many many thansk to @acastrolee for help

MRCC works 30-.....km/h or you have better version with autostop&go?

 

[rixm6]

today I do the calibration
I must have the version with stop and go

Does stop&go works now? - Thats I'm missing

 

[rixm6]

I connected all wires directly to fbcm connectors - can hi/lo, ignition and ground.

where is fbcm connectors location?

Fbcm is in fuse box near battery

 

[rixm6]

My car is Mazda 3 2018 with MRCC of Taiwan. My MRCC doesn't have Stop & Go function system.

Do you have Auto Hold? when no then you can't have Stop & Go function

 

[rixm6]

as far as i know, this tweak is only applicable to the older Mazda 3 model such as MY15/16

2017 Mazda6 also don't work yet this mod (hope sometimes it going to work:|)

 

[rixm6]

Same here

 

[rixm6]

Hi, can you write your configuration befor this change?

7200417BF0510000016
7200418000000BF0608

 

[rixm6]

You mean that I have can hi can lo 12v and ground in this conector? How do I know which one is can hi can lo etc.....?
Attach a picture of the empty conector near the fuse box.

don't know what connector it is - I hooked up directly to FBCM connectors