❗ Warning for 74.00.331 ❗
Installing AIO tweaks on firmware version 74.00.331 may disable wireless CarPlay. AIO tweaks are only recommended for versions 74.00.324 and lower.
Special thanks to @ktk and @Kore for helping with my installation in the comments of this post. It took me some time scrolling through the comments of that post to get this to work, so I decided to make a dedicated FW 74 post. Hope this is helpful for the next person wanting to install this mod.
If you have a broke touch screen, check out this link: Here
I will try to create a list of working tweaks. Leave a comment with the tweaks you installed, and on what FW.
List of tested tweaks:
Prerequisites
Firmware Compatibility: This guide is specifically for Mazda Connect firmware v74 and above.
(My system is running FW 74.00.324A EU on a 2017 Mazda MX-5 ND RF).
Hardware:
Step 4: Installing the tweaks in your car
I added a video of me doing the install on my car at the bottom of this post.
When installing an update on your Mazda, the car will typically stay on for about 25 minutes with the ignition in the "ON" position (without the engine running) if the clutch isn't pressed. This process should not take anywhere near 25 minutes, but if you are spending some time, I would suggest pressing the clutch every 15 minutes. For automatic cars, I believe you can press the brake pedal to achieve the same effect.
Installing AIO tweaks on firmware version 74.00.331 may disable wireless CarPlay. AIO tweaks are only recommended for versions 74.00.324 and lower.
Special thanks to @ktk and @Kore for helping with my installation in the comments of this post. It took me some time scrolling through the comments of that post to get this to work, so I decided to make a dedicated FW 74 post. Hope this is helpful for the next person wanting to install this mod.
If you have a broke touch screen, check out this link: Here
I will try to create a list of working tweaks. Leave a comment with the tweaks you installed, and on what FW.
List of tested tweaks:
- ✅ Background Image
- ✅Custom Infotainment Colors
- ✅Main Menu Tweaks
- ✅Text Colors
- ✅ Touchscreen While Moving
- ✅ Remove Camera Safty Warning
- ✅ Main Menu Loop
- ✅ Shorter Delay Mod
- ✅ Order of Audio Sources List
- ✅ Remove Message Reply
- ✅ Boot animation
- ❔USB Audio Mod
- ❔Remove Message Reply
- ✅ Videoplayer
- ✅ Speedometer
- ❔Castscreen-receiver
- ❔AIO Tweaks App
- ✅ No More Disclaimer
- ✅ Semi-transparent parking sensor graphics
- ✅ Improved list loop
- ✅ No More Beeps
- ❌Pause on mute
- ✅ 1 Sec Diag Menu
- ✅ Stausbar Tweaks
- ✅ Bigger Album Art
- ✅ Change Blank Album Art Frame
- ✅ Swapfile
- ✅ Fuel Consumption Tweak
- ❔Android Auto Headunit App
Prerequisites
Firmware Compatibility: This guide is specifically for Mazda Connect firmware v74 and above.
(My system is running FW 74.00.324A EU on a 2017 Mazda MX-5 ND RF).
Hardware:
- A USB drive formatted to FAT32.
- USB keyboard
- Download the latest version of Mazda AIO Tweaks:
- Visit the official Mazda AIO Tweaks website: Mazda AIO Tweaks.
- Download the appropriate version for your OS.
- Disconnect your computer from the internet and open the Mazda AIO Tweaks software.
- If your computer is connected to the internet you will get this error message (after the application has started you can reconnect your computer to the internet):
- Connect the USB Drive to your computer and ensure it’s empty and formatted to FAT32.
- In the Mazda AIO Tweaks software, select the tweaks you want to install:
- I have installed the following tweaks:
- Touchscreen While Moving
- Shorter Delay Mod
- No More Disclaimer
- No More Beeps
- I have installed the following tweaks:
- Build Your Installation Package:
- Click "Install Options" in the top left and select “Build run.sh”.
- After selecting your tweaks, click Start Compilation.
- The software will generate necessary files and save them to your USB drive.
- Click "Install Options" in the top left and select “Build run.sh”.
- On the USB, modify the "run.sh" file after compiling your tweaks. Search for "-eq 70" and replace it with "-eq 74".
- Download all the content from this Github.
- Place all the files/folders it in the root folder of the USB drive. Your USB should look like this now:
Step 4: Installing the tweaks in your car
I added a video of me doing the install on my car at the bottom of this post.
When installing an update on your Mazda, the car will typically stay on for about 25 minutes with the ignition in the "ON" position (without the engine running) if the clutch isn't pressed. This process should not take anywhere near 25 minutes, but if you are spending some time, I would suggest pressing the clutch every 15 minutes. For automatic cars, I believe you can press the brake pedal to achieve the same effect.
- Power on the car; you don’t need to turn the engine on
- Connect the USB drive and your keyboard
- On my unit, I had to switch off the hardware switch for Apple CarPlay to have the system recognize the USB. I used the top USB-A for my keyboard and the bottom USB-C for my USB drive (with a USB-A to USB-C adapter).
- On my unit, I had to switch off the hardware switch for Apple CarPlay to have the system recognize the USB. I used the top USB-A for my keyboard and the bottom USB-C for my USB drive (with a USB-A to USB-C adapter).
- Navigate to "Entertainment" and select your USB drive.
- Wait for the popup menu and click terminal.
- Wait another 20 seconds and click terminal again after the second menu appears (watch video for more information)
- Navigate to the USB drive using “cd tmp/mnt/sdb1”
- Might be “cd tmp/mnt/sda1” in your system. Watch video to see me navigating one folder at the time.
- Run the command "ls" in order to list the content of the folder, confirm the presence of the "run.sh" file and run the tweak using the command “sh run.sh”
- You will be prompted to confirm installation, select 'YES - GO ON'.
- Wait for the installation to finish.
. (navigating the diag menu blindly using a mouse.)
