2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter · #1 ·
I received a recall for a possible problem with the (brake) vacuumpump. It is possible that the brake pedal is feeling somewhat hard at low revs (loss of vacuum).
Oil has to be changed, flush oil has to be used, oil filter changed and the vacuumpump checked at a mazda service center.

I'm from Belgium, don't know it's a local/European problem or not.
 

·
Registered
Joined
·
10 Posts
Back from the dealer for the pump check, it was within specs so no replacement needed.
They changed the engine oil and filter and updated the pcm software, it took 1h.

Anyway, i'm wondering why do they to change this very expensive oil if no parts are replaced...
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top