I cut mine off. It'll give you about another 1.5 in. More clearance. Since my car is slammed, with nobody in the car it was about 3/4 inches from the bump stop to the crossmember. Hope this helps.
Rear Bump Stop Question!!
Hello!
Question I have the Eibach Sportline Springs.
The front looks PERFECT. But the Rear Height is a tad too high...Maybe need it .5" - .75" lower....
My Question is can you trim the Stock Rear Bump Stop at all?
Or are there aftermarket Rear Bump Stops that come slightly shorter than OEM???
Thanks in advance!
Question I have the Eibach Sportline Springs.
The front looks PERFECT. But the Rear Height is a tad too high...Maybe need it .5" - .75" lower....
My Question is can you trim the Stock Rear Bump Stop at all?
Or are there aftermarket Rear Bump Stops that come slightly shorter than OEM???
Thanks in advance!
1 - 1 of 6 Posts
1 - 1 of 6 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums
Come discuss all things Mazda 3 from the Mazda GT hatchback to Mazdaspeed, sedan and sport.
Full Forum Listing
Recommended Communities
