2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
So i just got these in the mail today and installed them right away. I did have a couple of problems. The bottom bolts were so rusted that one I could barely get back in and had to use a bunch of washers, the other one I broke off in the original light :/. Does anyone know the size of these bolts? I went to the local hardware store and they tried to match it up, the one that they gave me does not fit. Also, the side screw size. Does anyone know the size of these? It seems like on these lights you could put one on each side, but the original fogs only come with one. I didn't even look at the difference between the right and the left fog, but it wouldnt be possible to put the right in the left and vice versa would it? Any help is greatly appreciated.
 

·
Registered
Joined
·
19 Posts
If you go to the dealership they should be able to pull up a diagram of the fog lights and have the part number for the bolt. Most likely they will have the bolt in stock also. Or continue to trial and error until you find a working bolt? Good Luck!
 
1 - 2 of 2 Posts
Top