2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter · #1 ·
The front BC coils will go on fine but you are going to need longer rear bolts that connect the control arm to the spindle. Had to order the bolts strait from the dealer. I believe the part number is 9YAO-2A-228B. Here's a pic of the finished product:

ill post more pics of the wheel gap before and after soon. There is no vertical wheel gap in the front and about a two finger in the back atm, which is perfect because i drive people around all the time.
 

·
Registered
Joined
·
655 Posts
Not being a prick but i think this has been stated b4
 

·
TM3 Member
Joined
·
105 Posts
+3

It's nothing to do with bc coils or sedan. If you use genwan shocks etc. in the rear you will need extended bolts.

I think op just wanted to post pic of lambo doors :rolleyes 1:
 

·
General
Joined
·
170 Posts
+2 and you don't have to get them from a dealer. A hardware parts store such as Lowe's or Home Depot carries them :)
+666

sorry lol!
 

·
Registered
Joined
·
5,636 Posts
I've posted the longer bolt # at least ten times on this forum and five times on M3F and five times on MSF. I don't know how people miss the info. :shocked:
 
1 - 7 of 7 Posts
Top