[kamilavkin]

hello everyone, I join the problem, I changed the instrument panel on the American Mazda to a European one with a large screen on the right, the same problem arose with error B00D5: 01-8A. Help solve

 

[kamilavkin]

INDICATOR UNIT INSPECTION

 

[kamilavkin]

it seems to me that something is missing in our display unit, we need an electrician, I think one or more LEDs are missing, a signal passes through them to the ground and the computer sees it

 

[kamilavkin]

1. can apply a constant voltage to contact E, and break contact J, then the passenger airbag will always work and there should be no error
2. I read on the Ukrainian forum that to swap these wires E and J
what do you say?

 

[kamilavkin]

I'll check the wires. I will stick with the meter and change the region and check what changes on these wires in the plug. Apparently, changing to the EU panel for heating the seats can solve the problem, so I think there may be a difference in the location of the pins.

good afternoon, how is the result?

 

[kamilavkin]

I have some work, I'll check it out. The error was temporarily removed. It all depends on the display panel.

 

[kamilavkin]

problem with error B00D5:01-8A solved

 

[kamilavkin]

Привет. Как вы решили эту проблему?
[/ЦИТИРОВАТЬ]
добрый, да с этой проблемой я разобрался, надо блок индикации до работать, добавить резистор и диод или европейская панелька нужна но они не все подходят

 

[kamilavkin]

Добрый день. Вы писали, что решили проблему с ламповой подушкой безопасности при смене региона с США на Европу. К сожалению, я долгое время безуспешно пытался решить проблему на своем CX-9 2019 года. " доработать" мою панель.
[/ЦИТИРОВАТЬ]
ответ в личке