[dwarfmarine]

Hi guys, I’m installing a Dashcam with Hardwire kit into my 2010 3GX (base trim) Unfortunately as I’ve just moved to Canada; my decent toolbox with my multimeter is still at home in Aus.
Can anyone be a gem and knows off hand which fuse numbers in the interior fuse box might be Constant and which might be Acc hot? (Needs one of each for driving and parking modes) I’ve heard of people tapping the Hazards as they are constant feed but I am worried of doing this as they are a 15a fuse, the dashcam only runs a 5a so if/when I use the Hazards it will overload the little 5a, and running the 15a May risk damage to the Dashcam.
Look forward to any advice!
Thanks, Cameron

 

[MrBen]

Hi guys, I’m installing a Dashcam with Hardwire kit into my 2010 3GX (base trim) Unfortunately as I’ve just moved to Canada; my decent toolbox with my multimeter is still at home in Aus.
Can anyone be a gem and knows off hand which fuse numbers in the interior fuse box might be Constant and which might be Acc hot? (Needs one of each for driving and parking modes) I’ve heard of people tapping the Hazards as they are constant feed but I am worried of doing this as they are a 15a fuse, the dashcam only runs a 5a so if/when I use the Hazards it will overload the little 5a, and running the 15a May risk damage to the Dashcam.
Look forward to any advice!
Thanks, Cameron

There's a few threads on this subject, which can be found using the custom search box:

https://mazda3revolution.com/forums...234059-installing-dashcam-2019-mazda-3-a.html