2004 to 2016 Mazda 3 Forum and Mazdaspeed 3 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,767 Posts
Discussion Starter #1
CorkSport Performance is pleased to announce another addition to our Front Mount Intercooler line for the 2010+ Mazdaspeed 3. The latest kit is designed specifically to accommodate the CorkSport Power Series Short Ram Intake, giving customers the flexibility to purchase a kit that will accommodate a short ram intake while providing the maximum air cooling capabilities that can only be achieved with a front mount intercooler.



The factory top mounted intercooler can easily be over worked and overheated due to its smaller size. In return, the intake air temperatures rise causing a loss in power. Rather than mount the intercooler under the hood where it receives minimal air flow and is constantly surrounded by engine heat, the CorkSport Front Mount Intercooler Kit for the 2010+ Mazdaspeed 3 features an optimum front mount position to maximize exposure to ambient airflow. This not only increases overall cooling at every boost level, but dramatically reduces heat soak.

Unlike many other front mount intercoolers, the CorkSport Front Mount Intercooler for Short Ram Intake does not require any cutting or trimming of the vehicle and features a 24x6x3.5” aluminum core with custom cast end tanks and 2.25” aluminum mandrel bent piping with bead rolled ends connected with your choice of black, red, or blue silicone couplers and stainless steel T-bolt clamps.

The CorkSport FMIC Kit for SRI has been developed and tested specifically for the 2010+ MazdaSpeed 3 in all types of conditions including hot and cold, rain and snow, freeway driving, and stop and go traffic. During testing, the Front Mount Intercooler saw a pressure drop of approximately 2psi, a maximum efficiency of 85%, and supports up to 400hp. When coupled with the CorkSport Short Ram Intake, customers will benefit from substantial gains in torque and horsepower.



The best value on the market, CorkSport will be offering the new Front Mount Intercooler Kit for just $699.00 which includes all of the needed installation hardware and a two year standard warranty. As an added value, customers will now also be able to purchase the CorkSport Power Series Short Ram Intake at a reduced price of just $200.00 with the purchase of the Front Mount Intercooler Kit.

For more information about the CorkSport 2010+ Mazdaspeed 3 Front Mount Intercooler Kit, please visit CORKSPORT 2010+ Mazdaspeed 3 FMIC kit for Short Ram Intake
 

·
Registered
Joined
·
1,767 Posts
Discussion Starter #3
Our FMIC Kit has been developed and tested specifically for the 2010+ MazdaSpeed 3. It has
been tested in all types of conditions including hot and cold, rain and snow, freeway driving, and
stop and go traffic. The kit is able to offer up to a 4 psi increase in boost levels due to
decreased temperatures and increased core size. The increase in boost levels will show a horsepower
gain of up to 30hp and 35 ft-lbs of torque.
 
1 - 3 of 3 Posts
Top