2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

1 - 20 of 367 Posts

·
Registered
Joined
·
333 Posts
Discussion Starter #1 (Edited)
CONNECT II UPDATE FIRMWARE

NEXT Generation (2019~) Genuine Mazda CONNECT II Firmware is here and available in the usual Modfreakz Server..
SERVER

The SINGLE File is ONLY for Mazda 3 (BP) and Mazda CX-30 (DM) also next Generation Models on-ward,
it is not a .up File but a .kwi File on your small/clean Fat 32 USB Flash Drive.
Can Not be used in The Original Mazda/MZD Connect 2014-20xx.

CMU_7000C0A-NA01_10018.kwi *
CMU_7000C0A-EU01_10012.kwi*
CMU_7000C0A-4A01_10012.kwi

* NEW Update SEE CHANGELOG LINK BELOW.


The NA01 file is for North America ONLY and is < 856MB in size.
The EU01 file is for Europe ONLY and is < 706MB in size.
The 4A01 file is for ADR ONLY and is not available yet.
Takes about 10 minutes to run the install in your BP Mazda 3.

*
NOTE: Files Above are ONLY for all new Mazda 3 (BP) and CX-30 (DM).
If you have ANY other Skyactiv Model use this link if Wanting File Download or Help.

Older Mazdas
*

OFFICIAL UPDATE INSTRUCTIONS IN SERVER.

If your MAZDA has a Higher Package Number right now (which means a later Firmware version) CAN NOT INSTALL ANY OLD or OUTDATED VERSIONS as You can't downgrade in error.

Do Not Combine TiCK all the information at once into one .zip File or as a ''Download All''. Double Click on Server FOLDER reveals the Contents.

Download the Main File (.kwi) and other information .pdf and .txt as ONE File at a time.

IF you do have as a .zip file must use a separate program (WinRAR, WinZip) to un-Zip or extract your download.
MUST Then CHECK .kwi File Integrity with checking it’s Checksum Value.
MUST ONLY be a .kwi File on your small FAT32 Flash Drive to update in car.

CHANGELOGS for Gen II MZD/Mazda CONNECT

CONNECT UPDATE FIRMWARE 7th Generation


Right now..
WE ALL rely on other Mazda Owners or Mazda Dealer worker friends to obtain + supply this Dealer only software, so wherever you are in the wide-world and You can get a Copy for your own Country on a flash drive, Please PM me or Modfreakz or others here who can upload from you and host in Server giving to other Premium Mazda Owners. >:)
 

·
Registered
Joined
·
333 Posts
Discussion Starter #3
Still learning myself on ALL of the Software and Features on the 7th Generation Mazda Model.

I thought the First Gen Skyactiv technically was mind blowing..

This Next Generation BP Mazda 3 ON~WARDS is...... wow.....

Car monitors everything you do, adjusts to make your experience enjoyable without You Feeling you are not in control.

Owners can't get over how PREMIUM this Mazda 3 is and how quiet it is @ every level.

I have read some Mercedes and BMW owners are saying this Mazda 3 is way more sophisticated.

On subject on LED Driving Lights and Safety Lights, when on or off, have a look @ Personalization Features through MZD Connect.

I believe you have to do through your Mazda Dealer Service Dept to change some DEFAULT set up with M-MDS.
 

·
Registered
Joined
·
31 Posts
I’m little bit scared about update my infotainment system. I don’t know if is the right file for Canadian version ...
 

·
Registered
Joined
·
333 Posts
Discussion Starter #8 (Edited)
When you say “BP Mazda 3” what is the BP !?
BP is the MODEL CODE of the car...and is part of the cars VIN (Number).

Mazda worldwide uses this 'code' to itentify what model, Parts Departments also.

The old model Mazda 3 was the BM and BN.

One before that Mazda 3 was BL.

Mazda 2 is a DJ and DL

CX-3 is DK.

Some trivia, car makers don't usually use the O (letter) as in computers/data O letter gets mistaken for number 0, Same applies to letter I (i) as it can be mistaken as a 1.
 

·
Registered
Joined
·
333 Posts
Discussion Starter #9 (Edited)
I’m little bit scared about update my infotainment system. I don’t know if is the right file for Canadian version ...
What is the file in the car now, seriously Read what is says.

IF your FIRMWARE is a Lower Number then it is outdated, and up to you if you update at your own risk.

IF your Firmware is the EXACT SAME Number then you don't update...no reason to.

IF your Firmware Number is Higher than listed ABOVE then YOU DO NOT UPDATE...

Pretty simple really.

Changelogs are not available at the moment, same applies to fix bugs like ANY Firmware Update.
If anyone does not understand this then they should not touch their car.:nerd:
 

·
Registered
Joined
·
31 Posts
Thanks for the last message :) the update change nothing visible at this moment. The annoying voice on the GT is still there :( I check my VIN number before and it’s ok :)

I talk with Mazda about the voice when opening this door and the guy tell me that Mazda works with Panasonic at this moment for this problem
 

·
Registered
Joined
·
120 Posts
Is it just me or does the scheduled maintenance reset itself to Manual every time instead of staying on Automatic like I want?

I updated from 10012 to 10015.
 

·
Registered
Joined
·
333 Posts
Discussion Starter #15
Please tell me how to unzip this file(.kwi).
HUH...

WHY do you ask about unzip file?
DID you Combine all at once to download, YOU SHOULD download, 1 (one) file at a time.

IF your file is a .zip, you need to extract it with Winzip or other program, or download the .kwi file ONLY again, one file at a time.

ONLY .kwi on Flash Drive.
Check Hashsum.
 

·
Registered
Joined
·
3 Posts
Thanks for the last message :) the update change nothing visible at this moment. The annoying voice on the GT is still there :( I check my VIN number before and it’s ok :)

I talk with Mazda about the voice when opening this door and the guy tell me that Mazda works with Panasonic at this moment for this problem
Did you ever use the navigation system? The voice stopped telling me the speed limit once I used it
 

·
Registered
Joined
·
31 Posts
Thanks for the last message <img src="http://mazda3revolution.com/forums/images/smilies/smile.gif" border="0" alt="" title="Smiley" class="inlineimg" /> the update change nothing visible at this moment. The annoying voice on the GT is still there <img src="http://mazda3revolution.com/forums/images/smilies/frown.gif" border="0" alt="" title="Sad" class="inlineimg" /> I check my VIN number before and it’️s ok <img src="http://mazda3revolution.com/forums/images/smilies/smile.gif" border="0" alt="" title="Smiley" class="inlineimg" />

I talk with Mazda about the voice when opening this door and the guy tell me that Mazda works with Panasonic at this moment for this problem
Did you ever use the navigation system? The voice stopped telling me the speed limit once I used it
You have the GS or GT ? This problem is only certain GT. I’m not using the SD card so the voice is not talking. I’m waiting for Mazda update.
 
1 - 20 of 367 Posts
Top