2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

Change configuration (explore different functions ASbuilt)

2M views 7K replies 666 participants last post by  flipflipnz 
#1 · (Edited)
With a cruise like understood. Has come time for other useful functions.
I ask all who have a desire to connect to study.

Study SSU:
731-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 0 - I-Stop OFF, 1 - I-Stop ON (Tested on CX5)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known
B2 - configuration mode wireless control (step-by-step opening):
b7 - 0 or 1 = 0-W/O Advanced Keyless Entry; 1-W Advanced Keyless Entry
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 1-W Unlock mode (2-step); 0-W/O Unlock mode (2-step)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = 1-W Unlock mode (2-step); 0-W/O Unlock mode (2-step)
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

731-01-02 B0 B1 B2 B3 B4 B5(checksum) in HEX
B0 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 0 - I-Stop OFF, 1 - I-Stop ON (Tested on CX5)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

731-01-03 B0 B1 B2 B3 (checksum) in HEX
B0 - wireless mode lock/unlock is ONLY displayed on monitor (for example it is possible to configure only display the "unlock Mode"(step-by-step opening) or together with "Lock when leaving car":
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 1- NO visibility Lock when leaving car; 0 - visibility Lock when leaving car
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = 1-Visibility Unlock mode
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = 1-Visibility Unlock mode
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

Study RBCM:
7B7-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = 0 - no auto door lock or 1 - auto door lock (activates door lock function in RBCM)
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 0 - 1x blinker when doors close from remote control or 1 - no blinker when doors close from remote control
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = 0 - no blinker when doors open from remote control or 1 - 3x blinker when doors open from remote control (w/alarm system)
b0 - 0 or 1 = function is not known
B4 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 0 - OFF 1 - ON (ability to lock doors when Ignition ON) tested on CX5
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 0 - OFF 1 - ON (ability to lock doors when doors open) tested on CX5
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = 0 - if engine work then not possible open boot or 1 - if engine work then possible to open boot (from button on boot)
b0 - 0 or 1 = function is not known

7B7-01-02 B0 B1 B2 B3 B4 B5(checksum) in HEX
B0 - it is (in BIN):
b7 - 0 or 1 = no data on use
b6 - 0 or 1 = 0 - OFF Find My Car or 1 - ON Find My Car (Press lock button twice on remote controller, You will hear a shortly horn) tested on CX5
b5 - 0 or 1 = 0 - It does not allow to open the trunk in the Drive mode (D) or 1 - It allows you to open the trunk in the Drive mode (D) tested on CX5
b4 - 0 or 1 = no data on use
b3 - 0 or 1 = no data on use
b2 - 0 or 1 = no data on use
b1 - 0 or 1 = no data on use
b0 - 0 or 1 = no data on use
B4 - it is (in BIN):
b7 - 0 or 1 = no data on use
b6 - 0 or 1 = no data on use
b5 - 0 or 1 = 0 - no auto door lock or 1 - auto door lock (only for visible this function on CMU)
b4 - 0 or 1 = no data on use
b3 - 0 or 1 = 0 - auto door lock or 1 - no auto door lock (only for visible this function on CMU)
b2 - 0 or 1 = no data on use
b1 - 0 or 1 = no data on use
b0 - 0 or 1 = no data on use

7B7-01-03 B0 B1 B2 B3 B4(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = Lighting Coming Home Light - ON
b4 - 0 or 1 = Lighting Coming Home Light - OFF
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

Study IC:
720-01-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B2 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 0 - OFF Beeper driver seat belt; 1 - ON Beeper driver seat belt
b5 - 0 or 1 = 0 - OFF Beeper passenger seat belt; 1 - ON Beeper passenger seat belt
b4 - 0 or 1 = 0 - disable I-Stop; 1 - enable I-Stop (enable/disable button I-Stop and view logo "I-Stop" on Instrument Cluster)
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-01-02 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = 0 - Digital display Cruise control on IC; 1 - NO digital display Cruise control on IC
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-01 B0 B1 B2 B3 B4 B5(checksum) in HEX
B0:B1 - it is checksum for full configuration of car (IC)

720-04-14 B0 B1 B2 B3 B4 B5(checksum) in HEX
B1 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = 1 - W ALS (Headlight Auto Leveling System); 0 - W/O ALS
b4 - 0 or 1 = 1 - and if b5 = 0, then AFS and ALS (Adaptive Front Lighting system) is OFF, if b5 = 1, then AFS and ALS is ON; 0 - and if b5 = 1 then only ALS is ON
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-23 B0 B1 B2 B3 B4 B5(checksum) in HEX
B4 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = 1 - Cruise Control with LIM
b5 - 0 or 1 = 1 - Standard Cruise Control/MRCC
b4 - 0 or 1 = 1 - W/O Cruise Control/MRCC
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-24 B0 B1 B2 B3 B4 B5(checksum) in HEX
B2 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = 1 - SCBS ON; 0 - SCBS OFF
b4 - 0 or 1 = 1 - SCBS OFF; 0 - SCBS ON
b3 - 0 or 1 = function is not known
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

720-04-27 B0 B1 B2 B3 B4 B5(checksum) in HEX
B2 - it is (in BIN):
b7 - 0 or 1 = function is not known
b6 - 0 or 1 = function is not known
b5 - 0 or 1 = function is not known
b4 - 0 or 1 = function is not known
b3 - 0 or 1 = 1 - REAR CAMERA with DYNAMIC ASSIST LINES (7 wires) ; 0 - REAR CAMERA with FIXED ASSIST LINES (4 wires)
b2 - 0 or 1 = function is not known
b1 - 0 or 1 = function is not known
b0 - 0 or 1 = function is not known

for example:
edit string in configuration
7B7-01-03 0018 5400 2E
on
7B7-01-03 0018 9000 6A
adds features:
- RAIN SENSING WIPER
- AUTO HEADLIGHT ON


String 7B7-02-01 no need to change. This string enables/disables activated features, it can be done in media settings.
Connect to study.
 
See less See more
#63 ·
Automatic Door Locking Success

Well, that and with locks figured out, need to change the lines in RBCM module:
7B7-01-01
and
7B7-01-02

Data without automatic locking:



Data with automatic locking:




http://www.youtube.com/watch?v=tNpWT2dNEx4

http://www.youtube.com/watch?v=RvSQacJsvTE
Use windows's or mac's built-in calculator in programmer mode.




Thank you very much guys. I managed to activate my automatic door locking.:thumbup 1:
You guys rock.
 
#13 ·
Hi Withe. I've managed to modify RBCM but the problem is my HEX values before auto lock is different than yours. When i put your values. Auto door locking works but my Radar cruise control and smart city brake support not working. Icons are flashing on dashboard. I've restored the original values. I think that's because you don't have such features on your car. Do you know exactly which part of the hex should i change for just door lock. Here is my factory as built RBCM values:
 
#14 · (Edited)
For example, you have:
7B7-01-01 4550 0005 A1FB
7B7-01-02 A50C 4300 08BD

Where:
50 and 08 - OFF Auto door lock
FB and BD - checksum of your string

Your New DATA for Auto Door Lock:

7B7-01-01 45D0 0005 A17B
7B7-01-02 A50C 4300 20D5


WHATEVER YOU DO, YOU DO SO AT YOUR OWN RISK!
 
#21 ·
Hi White,

For the mikewilc, after the changes would be , if I 'm not mistaken.

7+B7+01+01+5D+D0+00+06+E1=(2)D4 : 7B7-01-01-5DD0-0006-E1D4
7+B7+01+02+A5+1A+43+60+20=(2)43 : 7B7-01-02-A51A-4360-2043

I can not overlook the great work you do White , thank you very much for your contributions
 
#22 ·
With a cruise like understood. Has come time for other useful functions.
I ask all who have a desire to connect to study.

Study RBCM


edit string in configuration
7B7-01-03 0018 5400 2E







on
7B7-01-03 0018 9000 6A
adds features:
- RAIN SENSING WIPER
- AUTO HEADLIGHT ON





String 7B7-02-01 no need to change. This string enables/disables activated features, it can be done in media settings.
Connect to study.
Thank you very much for your great work. I want to apply this on my car but I don't quite get the diagram you posted. If it is possible can you post the actual wiring of the switch? Sorry for the favor. Thanks for your time and effort.
 
#47 · (Edited)
Really dynamic lines can be included by using AS Built, but it is necessary to have a camera with dynamic lines (rear view camera with CAN), car must have a sensor turn steering wheel and change connecting camera
 

Attachments

#54 · (Edited)
Maybe it's better to find in the CMU code what trigger this feature. I will check in IDS data if there is something related to that. With the firmware you can see the port pin switch instructions... but you have to figure which pin correspond to the manual notation, not easy. Added to the fact that the value is sometime propagated between multiple variables...
 
Top