[mpp12]

my turn signal does not work, I spent 1 hour looking for it in the manual, and I dont find it.

can anyone tell me the turn signal bulb type...

mazda 3 2015 sedan.


thanks

if anyone can guide me to a reference.......

 

[GerryB]

7440

 

[arathol]

Did you try using the index? Light bulbs > Specifications > 9-9, Light Bulbs, Exterior light.

Front turn signal WY21W (7443NA)

Rear turn signal WY21W (7443NA)

 

[mpp12]

thANKS

 

[carid]

thANKS

Hey @mpp12

Just in case you haven't got the bulbs yet, let me suggest you some options we carry:
Front Turn Signal Light Bulbs at CARiD
Also just wanted to let you know, if you decide to upgrade the turn signals to LEDs, you will most likely ned to hook up an additional load resistor on each side.
Hope this helps!

 

[mpp12]

I just brought some led replacements from ebay...

Do I need to put some resistors or something to them.... That seams a lot of trouble for turn lights.

 

[mpp12]

The only lights I would like to improve are low beams...

and the problem is that Im new in the mazda world and here they use a lot of Acromins that I dont understand....

I would love to improve low beams....

 

[arathol]

I just brought some led replacements from ebay...

Do I need to put some resistors or something to them.... That seams a lot of trouble for turn lights.

Possibly. If the signals hyperflash after installation you need resistors.
These are prewired plug and play for 7440/7443 bulbs.

These bulbs don't need resistors. They are quite bright also, much brighter than the incandescent bulbs.

The only lights I would like to improve are low beams...

and the problem is that Im new in the mazda world and here they use a lot of Acromins that I dont understand....

I would love to improve low beams....

Take a look at these. This design works very well.