[kombs]

Put konis on my car recently and afterwards the brakes are chirping while driving and during braking it sounds like a thinking noise as the car slows. I popped the rotor off the driver side and some rust had gotten knocked loose behind the hat and I cleaned it off and it was fine. I did the same for the passenger side and the noises persist. Any other suggestions? Everything's tight. Nothing broken anywhere. Front brakes , just new struts, used OEM springs

 

[finaldrive]

Put konis on my car recently and afterwards the brakes are chirping while driving and during braking it sounds like a thinking noise as the car slows. I popped the rotor off the driver side and some rust had gotten knocked loose behind the hat and I cleaned it off and it was fine. I did the same for the passenger side and the noises persist. Any other suggestions? Everything's tight. Nothing broken anywhere. Front brakes , just new struts, used OEM springs

Check the end links in the front make sure you install it right. (It might be hitting the side frame) mine was doing that found out my end links was scrape almost 1/4

Sent from AutoGuide.com Free App

 

[kombs]

I'll check it out. thank you

 

[mekanick]

Make sure you didnt bend the metal shields behind the rotors. They could be rubbing on the rotor if you bumped/bent them a little