2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
243 Posts
Discussion Starter · #1 ·
there's several different styles (LED, smoked, red) for 04-09 models on ebay, nothing for 2010+


companies making taillights for mazda 2 :(


any chance we'll see them or do I attempt to open the stock ones and paint them. from what i've read the taillights are a bitch to do unlike the headlights
 

·
Registered
Joined
·
790 Posts
heat gun? type of knife? sealed back together with? anything I missed?

ps. i heart u
Lol thanks man!

I was heating up a knife and cutting it slowly. Until I bought a dremmel... Just be careful not to cut into the inside lenses
@Agila thanks!

Sent from a Parallel Universe
 

·
Registered
Joined
·
790 Posts
what did you use to seal them up with? any moisture issues?
At first I used 3M weatherstrip adhesive, but went back and resealed them with clear silicone and used epoxy to keep the backside and lens together. I used the epoxy in spots, about an inch apart.

Sent from a Parallel Universe
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top