2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
@ufromgeorgia : ID7 = Autorun: plug an empty FAT32 formatted usb stick to your computer, open AIO 2.8.6 - top right corner, tick checkbox, then click compile autorun at the top button. Copy the files directly to the usb stick. unplug the usb. go to car, stat engine or ACC (push start button 2 times), plug the usb stick in, wait and follow pop-up instructions at MZD display.
Done. But it seems that my CX3 (2016) wont see my USB. I have been wating several minutes, but nothing happens.
What am I doing wrong?

Grtz Jer
 

·
Registered
Joined
·
5 Posts
But you wrote, that you have FW 55 installed, right? So this should not be the issue. Or am I mixing some posts up? Then sorry... if you have installed FW 59.00.5022 or higher, then your assumption is correct, that a serial access is necessary to be able to install AIO Tweaks via USB.
My OS-version is 59.00.502 EU N
Thank you for your effort towards me.
 
1 - 5 of 5 Posts
Top