2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Ok so I recently replaced the keyless entry on my 3 and after doing this, everything synced up and the locks work properly on every door except the driver door. If I press the remote all locks will unlock/lock but the driver door has to be done manually. I can hear it trying to work and see it shake slightly, but it won’t switch over unless I do it myself. Same story with the door lock switch. It works for locking all other doors except the driver door. Have tried the driver and passenger switch with the same result.
So the only way I can lock/unlock the door is by hand from the inside or with they key on the outside.
Any ideas as to what could be wrong?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.