2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
tmic
1-20 of 21 Results
  1. Mazda 3 Parts - Buy / Sell
    Selling my Custom performance tmic and greddy fv BOV from my 2010 mazdaspeed 3. Offer what you will pay and I'll reply to you.
  2. Mazdaspeed 3 Parts - Buy / Sell
    Off my 2010 Mazdaspeed 3. Custom Performance top Mount intercooler with a Greddy FV Blow off valve. Family needs money so offer and I'll get back to you.
  3. 2010-13 Mazdaspeed 3 Engine and Performance
    Hello again , just had a questions, can you run the stage 2 maps that require fmic with an upgraded tmic?
  4. 2010-13 Mazdaspeed 3 Engine and Performance
    Hi everyone. I tried searching for an answer and got nothing definitive so I figured I would ask the experts. I apologize if this is covered somewhere else that I've missed. Anyway, I installed the Corksport TMIC upgrade (linked below) on my 2012 MS3 and ever since I'm getting the "P0101" DTC...
  5. Mazdaspeed 3 Parts - Buy / Sell
    Have here a CP-E TMIC for sale: No bent fins Will include the shroud Ran for about <6 months 290 plus shipping *yes the pictures dont have the bolts to the shroud but i will source that for you*
  6. 2010-13 Mazdaspeed 3 Engine and Performance
    Hi guys, Thanks to those who helped me in my decision. I'm posting the pictures of the items I got in the mail. For those have brought the internals, are the box in the pictures the same you guys received? Why does it mention about beware of camshaft wear and follower? my car is new, 2013!new...
  7. 2010-13 Mazdaspeed 3 Engine and Performance
    Hi guys Like I wrote on another thread, i'm getting ready to do a tmic upgrade with the hpfp internals and jbr rmm 70 .duro. I 've been considering cs and cp-e tmic but also would like to hear impressions from any member who has installed the ets. From what I have been reading on other forums...
  8. Mazdaspeed 3 Parts - Buy / Sell
    As the title says im in the market for an aftermarket TMIC: CS, CP-E, ETS or anything thats at least 3 inches. prefer local norcal bay area not trying to pay too much in shipping but will keep an open mind. show me what you got!
  9. 2010-13 Mazdaspeed 3 Engine and Performance
    Hey guys, I have been searching for some answers on this. Ever since Corksport came out with their hood strut lift kit, I saw that the ms3 owner had removed his stock TMIC shroud. Has anyone done this? Are there any benefits to removing the shroud? Does the intercooler run cooler this way...
  10. Mazdaspeed 3 Parts - Buy / Sell
    Preferably either a Corksport or ultimate racing exhaust and fmic, and ets tmic, but I'm interested in any offers. Open to just about any brand of coils, camber arms, and wheel spacers I live in Philly area so something like the exhaust would probably best if picked up. I am willing to drive...
  11. 2010-13 Mazdaspeed 3 Engine and Performance
    Hey guys i want to buy one but dont know which one to get. I will upgrade the turbo in the near future but i dont know which one will work best.
  12. 2010-13 Mazdaspeed 3 Engine and Performance
    hey guys ive been debating if i should get a new TMIC (cp-e) since i will be going stage 2. internals, dp, ap, sri/tip rmm, tune, but i dont know how necessary an after market TMIC is. Wont be racing on the track or anything, this is my daily, so i was wondering if id be able to skip by without...
  13. 2010-13 Mazdaspeed 3 Engine and Performance
    Would like to know if ets tmic would be the best way to go or would a cheep fmic about the same price mods hpfp Sri tip dp rp ap rmm in the mail is bpv and occ. no bt as of yet but I am looking at a bnr v3 and cbe
  14. Buy / Sell / Trade
    Had it on my car for a few months before I ended up selling the car. Retail over 600, yours for $400 plus shipping. Wasn't able to get my photos on here but you can check them out at my craigslist link. http://sandiego.craigslist.org/nsd/pts/2749685191.html, also have a few other items that came...
  15. 2010-13 Mazdaspeed 3 Engine and Performance
    cp-e? MZR 2.3 DISI Top Mount Intercooler | Custom Performance Engineering Been reading about aftermarket TMICs, and it seems like a no-brainer. More cooling, less pressure drop = less stress on the turbo, faster spool up, etc. Are there any downsides other than price? Just fishing for...
  16. Mazdaspeed 3 Parts - Buy / Sell
    Sold lock / delete thread Please lock / delete thread unit sold
  17. 2010-13 Mazdaspeed 3 Engine and Performance
    Have you guys noticed that CP-E has released a TMIC for the gen 2 MS3? It is listed for $350. By far the cheapest I have come across. I don’t understand how CP-E is $200+ cheaper than the ETS or StreetUnit TMIC. Do you think it is the same quality as the other two? Usually CP-E has great...
  18. 2010-13 Mazdaspeed 3 Engine and Performance
    Am I the only one that thought that CorkSport was releasing their FMIC not a TMIC? I understand that products take time to develop, but their project car page said that the FMIC was supposed to come out summer 2010. And now this TMIC will not be released until March! What the heck? If I...
  19. 2010-13 Mazdaspeed 3 Engine and Performance
    Hey guys, I am new to this forum, and would very much appreciate some advise on getting a RP/DP and TMIC. I have done tons of research and have kind of scared myself about the possibilities of damaging my engine/turbo with the RP and DP. I know that the TMIC is not risky as long as I get one...
  20. 2010-13 Mazdaspeed 3 Engine and Performance
    Was reading over on another forum and ETS announced a group buy for their TMIC for $495 shipped. They won't ship until end of Dec or beginning of Jan as they are currently out of stock, but the deal is limited to 25 sales. I was number 9 and they announced the sale today. Just call them and...
1-20 of 21 Results
Top