2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

springs

  1. 2014 - 2018 Mazda 3 OEM Stock Suspension Shocks Struts Springs

    Mazda 3 Parts - Buy / Sell
    This suspension setup is from a 2015 Mazda 3 Sport 4 door with +92k miles on it. I have the original manufacture shocks, struts, and springs. There was nothing wrong with them, no leaks, and they performed well. The reason I am selling these is because I just installed a new setup to lower my...
  2. 2014-2018 Mazda3 H&R lowering springs

    Buy / Sell / Trade
    I have a set of brand new, unopened H&R lowering springs I'm looking to part with. Never got around to installing them before I sold my car and have no use for them. Looking for $175 OBO, local pickup preferred and cash only. Thanks!
  3. 1st gen with 1.8" lowering springs?

    2004-2009 Mazda3 Suspension & Handling
    Does anyone on here have a first gen lowered on 1.8" springs? I bought some Eibach springs and would like to see how it looks on other setups. Also how does it ride?
  4. Tein springs??

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    I just found out that Tein now makes springs for the 3rd gen 3s. Anyone know about them? I am in market for springs and came across these. Part# shows to be SKMA8-AUB00.
  5. FS: H&R lowering springs 28821-1

    Mazda 3 Parts - Buy / Sell
    FS: H&R lowering springs 28821-1 SOLD!
  6. WTB: 14+ Racing Beat/Eibach Springs or Koni struts

    Mazda 3 Parts - Buy / Sell
    Found some RB Springs, please ignore this. On the off chance someone is unloading some new/lightly used Racing Beat (ideally) or Eibach springs, I'd like to chat with ya. Not interested in H&R/Corksport as they are too low for my needs. Also interested if anyone has new Koni Special Active...
  7. Did racing beat just sent me wrong springs?

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    Has anybody using Racing Beat springs has seen this? Rear springs laters are upside down!
  8. WTB 2016 Springs

    Mazda 3 Parts - Buy / Sell
    In the market for some corksport or eibach springs. Please send me a pm with the price shipped to 55109. Thanks!
  9. TEIN EnduraPro w/S Tech Lowering Springs

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    Anyone heard of using this combo, currently running it, and how’s the quality of TEIN?
  10. WTB Eibach Pro Springs

    Mazda 3 Parts - Buy / Sell
    Hey guys i’m looking for some Eibach Pro springs for my 2018 mazda 3. I think 14-18 should be the same. I’m located in North County San Diego. Let me know if you anything. Thanks.
  11. VOGTLAND/Eilbach lowering springs help

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Had 205/55/16 factory rims upgraded to 225/40/18 konig oversteer rims.. still not happy with the wheel gap but this is just a A-B (just wanting it to look better) car so I was thinking let's do some lowering springs but there are so many brands out there I don't know what to get.... I saw...
  12. 2014+ Mazda 3 H&R Lowering Springs

    Mazda 3 Parts - Buy / Sell
    I have a set of brand new, never-opened H&R Lowering Springs for sale. Decided to go with coilovers before I had the chance to install them and the return shipping to Germany is much too high to justify, so I figured I'd seel them here at a bit less of a loss. These are Part # 28821-1. Looking...
  13. Struts + Lowering Springs required new endlinks?

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Hey guys, I lowered my car maybe 4 months ago with Koni Yellows struts and Road Magnet lowering springs. But recently I have been hearing some clunking sounds when going over any bump, big or small at lower speeds. Strangely when I go over small bumps at higher speeds, I do not hear any extra...
  14. FS: Gen1 Mazda 3 Koni Sport Kit with Eibach Springs

    Mazda 3 Parts - Buy / Sell
    I posted this a few weeks ago, but didn't get any replies. This is for a 2004-2009 Mazda 3. I have a 2005 Mazda 3 hatch. If you are interested at all, please send me an offer. I am in the Washington DC area (Silver Spring, MD). I'd rather not ship, since these are large items, but we can work it...
  15. Local Installation Help - Charlotte NC - CS lowering springs

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    What's up M3R - I'm looking for some installing my corksport lowering springs on my 2018 3 hatch. Anyone within 1.5 hours of Charlotte NC that is willing to help would be greatly appreciated. BEER INCLUDED!!! I've called 4-5 shops for quotes, and every single one is telling me over $600...
  16. FS: 2014-18 vogtland lowering springs and BaysonR roof spoiler

    Mazda 3 Parts - Buy / Sell
    Hey guys. I don’t have the car anymore and didn’t get a chance to install them. Open box, never used. Asking $200 for the springs and $100 for the spoiler. Located in LA/OC area. Local pick up preferred but im willing to ship.
  17. MS3 Springs on 3

    2004-2009 Mazda3 Suspension & Handling
    Hey all, bought my first Mazda roughly a month ago, and I want to upgrade my suspension. I’ve already chosen what shocks I want (Koni yellow) but I need help on spring choice. Yes I have searched, and I still don’t know if MS3 springs/rates are compatible/safe with a 3. I ask because I’m...
  18. FS: Mazda Euro Eibach Lowering Springs 4100-77-974 2014+

    Mazda 3 Parts - Buy / Sell
    Looking to sell my Euro Eibach Lowering Springs. These are not the prokit you can easily get in the US. These were purchased from a Mazda dealer in the UK. These look great with the stock 18’s, however I have Mazda6 stock 19’s and they just rubbed too much. I replaced them with Racing beat...
  19. 2004-2009 Mazda 3 Koni Sport Kit with Eibach Springs

    Mazda 3 Parts - Buy / Sell
    I am in the Maryland/Washington DC area. I posted on local craigslist, but wanted to get the word out so I joined the forum. Apparently I can't post the link since I don't have the post count. Feel free to message me if you are interested and I can forward you to the craigslist post. Selling a...
  20. Do I need to roll fenders on stock springs?

    2014-2018 Mazda 3 Skyactiv Wheels and Tires
    Hello, I recently got a 2018 mazda 3 5 door GT. I do not like how far wheels are sunk in compared to fenders. I am thinking of putting 20 mm spacers in rear and 15 mm in front. Ideally it would have been 15 and 10 rear and front respectively, but I do not want to go through the hassle of...
Top