2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

spray

  1. 2014-2018 Mazda 3 Skyactiv Discussion
    This morning I used my windshield washer and noticed that the center of the spray pattern from both nozzles was weak. That is, there was noticeably more spray on the sides of the V pattern from each nozzle than in the center of the V. I figured the windshield washer level must be low so I went...
  2. 2014-2018 Mazda 3 Skyactiv Discussion
    I hope someone can lead me to some kind of conclusion on this weird phenomenon. So, sometimes when I start my 2014 Mazda3 (doesn't matter with a warm or cold start), it smells like someone opened up a can of spray paint. It's a really alcohol-like smell. I would say it happens every 1/100 starts...
  3. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hi, The other day I was wanting to clean off the pollen from the rubber window seals on my doors. I was recommended by a associate at griots garage to use 3m adhesive remover to clean off the pollen. I sprayed in a little remover and it also got some remover on the plastic door trim...
  4. Interior / Exterior
    So I've had my emblems dipped for about 2 months now and am ready to give my review. And I love it! I love in Arizona so the heat has not affected them. I've taken a pressure washer to them and still nothing. I used black first and it took 4 coats. Then used the vintage gold with 4 coats, and...
  5. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Just put this on my hood today....took a little longer than I expected but the results are pretty good so far. Gonna see how this works out over the next few days as it says it takes 1 - 4 days before it fully cures. Either way...longest part of the process other than the waiting was dressing...
  6. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    3M Spray Hood Protection or 3M Clear Bra? Anyone here use the 3M spray-on hood protection kit or the 3M clear bra? Rock chips are common place out in Arizona and a cars hood can look like it got sand blasted in just under a year of highway driving. I want to protect the front bumper and hood...
  7. 2010-2013 Mazda 3 & Skyactiv Wheels and Tires
    I went outside this morning and there's yellowish/orange crap on all my rotors. It rained overnight if that matters. Had new wheels and tires installed yesterday as well
  8. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Hello all , I got a 2013 3 hatchback , All the smooth parts are easy to get Vinylex Lexol protectants to look great but the dash is a different animal with the dots. What protectants are good for the dash. Thanks
  9. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Has anyone tried or heard of this. I would love to use if it is worth it. Damn highway dings are killing my hood. Please tell me it works, I am almost this close to plastidip'ing my hood. http://3mauto.com/paint-defender-spray-film.html
  10. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    I'm planning on tinting my taillights with this, but I'm curious if anyone else has done this, how well it works, and if you recommend a clear coat. Also, would it be better to take the light housing out, or just tape it off and paint it on the car? Sent from my iPhone using AG Free
  11. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    I saw this at the store over the weekend, as I was needing a new quick spray for between waxes. Zymol had this spray glaze, and the detailer, the glaze seemed to be more of a quick wax type and fit for what I was looking for. I decided to try it because have heard others using the Zymol line...
  12. 2010-2013 Mazda 3 Engine and Performance
    So yesterday, my Injen SRI arrived and of course I had to put it on right away :tongue:. When I was putting it on, everything seemed fine under there. After the install and a few times of stomping on the gas and going 1-5 gears (MT), I decided to check everything under there. When I got to...
Top