I figured I’ll tap into the veterans in this field and ask for some advice.
I recently got my 50 mm over fenders/fender flares that I’d like to install. Realized I will need spacers to sit flushed with my new fenders.
What would you recommend I should get for spacers size and if you...
Looking to purchase 2 pairs of wheel spacers:
1st pair: 15mm hub-centric, w/extended studs
if possible, specs should match Ichiba Version 2 (15mm)
2nd pair: 20mm or 15mm hub-centric, w/extended studs
if possible, specs should match Ichiba Version 2 (20mm)
I’m selling a pair of H&R 15mm DRM spacers. Used for a few weeks on the stock wheels until I got new wheels and didn’t need them anymore.
As a bonus, I’ll throw in the 5mm spacers I had on the fronts for free with purchase. Specs: 5mm 5x114.3 67.1mm T6 aluminum
$120 shipped or $110 local...
I recently got a 2018 mazda 3 5 door GT. I do not like how far wheels are sunk in compared to fenders. I am thinking of putting 20 mm spacers in rear and 15 mm in front. Ideally it would have been 15 and 10 rear and front respectively, but I do not want to go through the hassle of...
Wheel Spacers 5mm, Bolt Pattern 5x114.3 mm, Centerbore: 67.1mm (Set of 4)
From James Barone Racing
I put them on once just to look at the result. Not even 1 mile on them.
Picked up a set of silver 2011 MX-5 wheel - 17x7 +55. Tried searching a have seen some examples where they are on a 2104 Mazda3 GT but don't know if they used spacers. Only interested in getting them back to stock size so looking at 5mm spacers.
1. For anyone that has this...
I have had several places tell me that Eibach does not make a spacer to fit a '14? However, I know from the board there are several people running them.
Can anyone provide me with part #s for a 5mm and 10mm hubcentric set?
I am looking to make the stock Oem 18 inch wheels flush with fenders. Will the 5 mm wheel spacers do that. Or If I go with a 225 45 18 tire will that look flush. Does anybody got a set up with stock Oem 18 inch wheels with spacers not lowered.
Hello Ladies and Gentlemen,
I am currently trying to add 25mm spacers to my car for a flush look, not planning on buying new rims any time soon. I got some spacers i got off amazon, that a friend is running for about a year now and has not had any issues and dailys his car. I first ordered the...
I am currently running my winter setup, OEM 18x7 ET50 with Conti DWS06 225/40. I'm lowered on H&R with Koni Yellows. I want a flush fitment, or something pretty close. What size spacers could I use without having any rubbing issues? Fenders are rolled. I was thinking 10MM F and 15MM R. Any...
FS: BC Racing BR Type Coilovers &amp; Ichiba 15mm Spacers
Hey everyone, I got a set of BC Racing BR Type coilovers for sale. Ive had these coilovers for about 2 months and I put about 1k miles on them. Theyre in excellent condition and rust free. The threads are in mint condition and come...
So I am in a bit of a bind. I got a new Mazda 3 sport gt a couple months ago and I am loving it very much so. The problem I have is that with winter coming I don't have a winter wheel and tire setup. And I cannot afford to buy one at the moment. What I do have is a winter setup from my previous...
Hello Ladies and Gents,
I recently lowered my 3 on Corksport springs, i am running the OEM Mazda Rays Wheels, which are i believe 18x7 50 ET, the wheels are a bit tucked in now, i wanted to know if you guys would know what size spacers would give me a more flush look. (yes i know how spacers...
I'm thinking about buying hub-centric spacers to use with my OEM 18s to get rid of the sunken look for the time being. I don't plan on buying a new wheel/tire setup until my tires need replacing, at which point I'll probably get something with an appropriate offset to get a more flush look...
I searched everywhere and found the same generic response to this problem, but nothing too specific- so I apologize in advance if I missed a search result.
I recently got Eibach 15mm spacers, and stock studs hit the back of the wheel (Gen2 Mazdaspeed Split-Spoke) and dont allow it to...
I just ordered a set of the Eibach Pro-Kit springs and also Koni Sport struts and shocks. I have a 2015 Mazda 3 sGT model with the 18" wheels and I'm wondering if anyone has used wheel spacers with the Eibach lowering springs. Of all of the pictures I've seen on this site of users that have the...