Search Results for ‘seal’

I was told that I have a bad oil leak(more like a pour) coming from my 2017 mazda 3 sports front main seal. In order to get to that you have to remove the crank pulley and I was told on some mazdas you can not just remove the pulley because it will mess with the timing. Delership warranty won't...

In the front timing cover of my 2004 Mazda 2.3L there is a bushing / seal of some sort that seals the joint between a feed line in the timing cover and the front of the engine block. It is is hard and not in good condition. I believe this oil feed line is for the VVT. I can't seem to find a P/N...

In the front timing cover of my 2004 Mazda 2.3L there is a bushing / seal of some sort that seals the joint between a feed line in the timing cover and the front of the engine block. It is is hard and not in good condition. I believe this oil feed line is for the VVT. I can't seem to find a P/N...

Driver's side front on my 2017 GT Sedan squeaks when I roll the window all the way up or just as it's coming down. I've lubricated that sucker all over with silicone and I can't get it to stop. Ideas?

Firstly, this story just solidifies my belief in changing one's own oil. Changing it yourself... getting on the ground and inspecting your car. This periodic inspection likely saved me a costly repair bill down the road. Here goes: I bought my 2017 Touring 2.5 hatchback (manual transmission)...

Hey all. I'm new to the Mazda 3 and recently got a personal lease one from 2014. It had low miles and really nice inside so I decided to give Mazda a shot. My main question right now is about the seals around the doors. I took it to a car wash and noticed water collected on the car outside of...

Did some preventative maintenance today. For all you hatch owners, check under the weather seal rubber hatch trim that seals the hatch to the body. FOUND LOTS OF pre RUST on some spot welds especially on the bottom area by the hatch latch hook. Had some stage 2 rust (metal corrosion and rust...

Just wondering if anyone has tried this product to help with keeping out external noise. P Shape 80" Automotive Door Noise Control Rubber Seal Edge Strip Weatherstrip | eBay

Guys, check your door seals. Mine was completely out of the door's track on the top part of the driver door. The side ones are attached with plastic inserts. It's probably the cause of my back window frosting up while driving. The seals must of froze on the chassis and while trying to open the...

Has this happened to anyone? It keeps coming out, it looks like the clip is broken. Anyone have any ideas to fixing this? I thought about glue maybe but I don't want it to stick to the window. I'd be fine with just buying a new one, but I have no Idea on where to get one from. Any help is much...

I'm installing the bi-xenon projectors from the retro-quik kit from TRS and I can't figure out how to seal the back of the headlights with the bulb, the new projects is so in-set from where the halogen was from the back that the old grommet won't make a seal to prevent water from getting in. any...

hey guys i blew my turbo seal a couple days ago and i was wondering if anyone knew how much it is to replace it should be under warranty but if they try and e nit picky about my parts i was just wondering if anyone knew of how much it may cost outta my pocket.... and also was wondering if anyone...