roll

Hello, I recently got a 2018 mazda 3 5 door GT. I do not like how far wheels are sunk in compared to fenders. I am thinking of putting 20 mm spacers in rear and 15 mm in front. Ideally it would have been 15 and 10 rear and front respectively, but I do not want to go through the hassle of...

Hello, I recently got a 2018 mazda 3 5 door GT. I do not like how far wheels are sunk in compared to fenders. I am thinking of putting 20 mm spacers in rear and 15 mm in front. Ideally it would have been 15 and 10 rear and front respectively, but I do not want to go through the hassle of...

Hi all, New Mazda3 owner 2016 2.0L. quick question, I searched but couldn't find an answer. Is there a way to program the passenger side window to roll down with one push, just like the drivers side?

Hi all, I've recently purchased a 2017 Mazda 3 5door Touring. Is there a way to roll down the windows without turnin on the ignition? By that I mean pressing the start button twice without holding the brake pedal. When I do that I can hear what i presume to be the fuel pump coming on. Is there...

Hi all Colorado Mazda drivers. We should try to schedule something soon. I'm in Centennial. Scott Sent from my LG-M430 using Tapatalk

hello everyone. i have seen in a youtube about a module ( without wire cutting ) who can control on the mirror and the windows by clicking on the car remote control . that's for my 2014 mazda 3 and i already have an electric mirror and yesterday i forgot to close them and someon broke the mirror...

I'm looking into wheels and want to go wide enough without rubbing or have any issues. For sake of this situation, let's say I get my fenders rolled and I'm lowered on Eibach or maybe even H&R height. What would be the maximum size wheel and tires that would fit? I don't want any rubbing since...

I found a set of awesome wheels from japan but they are a little more aggressive than I want. Can anyone confirm that I will be able to clear 17x8 +35 with 215/50R17 tire without fender rolling? I plan to put a set of General Altimax Arctic winter tires on them. I also have Eibach Pro-kit...

This is my first guide. So bear with me. I doubt it will be the best and it isn't a hold your hand guide because this isn't a hard job just a tedious process. I recently installed some safety gear in my car for track purposes. My car is a 2010 Mazda3 Sedan. The roll bar will fit a hatch as well...

Hey guys I've been wanting to reduce body roll on my car for so long and I haven't had some money till now, I was wondering if i should; - buy a CS rear sway-bar first then some H&R springs OR - H&R then the CS sway-bar???? My only problem is that if I get the sway-bar, i have to literally...

2010 mz3 hatch on 18x9 +35 offset and 225 tires. Rolled the rears will the fronts need to be rolled with a 1.5" drop?

Autopower bolt in roll bar for BK & BL Mazda 3 hatch only, powdercoated pure gloss white, no damage nor scratches to surfaces, comes with all parts. $600 + shipping OBO Interior can remain in vehicle, only will need to be partially removed for installation purposes.

Hey guys! Just recently bought my 2013 CWP Mazdaspeed3 and loving everything about it so far! Coming from an '06 WRX is a pretty big difference tho haha. I live in Cambridge, MD. The other day, well a week ago, I seen a slammed grey/silver Gen2 cruise thru my town with exhaust and tinted out...

Random thoughts how some of you shift when racing from a roll. For example 3 honks on a 60 roll do you drop it right into 3rd last minute on 3rd honk and go, or do you already be in the lower gear so no shifting is required when the 3rd honk goes. Dropping it vs. already being in lower gear...

roll call, who is waiting on a 2014 MZ3. Hello, I'm new to the board. Seems like a nice board. I am waiting on the 2014 MZ3. I don't want to get one of the first cars off the assembly line, and am hoping to get a reasonable deal , so I will wait until at least November. It's hard not...

im looking to lower my 2012 mazda 3 hatchback and i was owndering, if i get the H&R lowering springs from corksport that lower 1.6 in the front and 1.9 in the back will i need a fender roll? i measured my back tires distance from rubber to fender and it seemd like if i lower it more than an inch...

Anyone want to meet up sometime today or this week?? We can cruise around and chill or do whatever. I want to drive my car again.

Does anyone have pictures of their fenders having been rolled? Particularly the rear.

So I'm planning on going to Huntington Beach both Friday and Saturday the 24th and 25th! Anyone down to do a caravan on one of those days let me know!

which ones are the best to stiffen the ride (aside from coilovers) why you want to be so stiff? because hellaflush! thanks