Honda owners have figured out that if you have a car without remote start, you can get it just by adding another key fob with a start button. All you need is a fob with the same FCC ID and the start button. I know that the FCC approved a 5 button version of the key for my 2015, but I've never...

Has anyone had a remote starter installed onto their 2019 Mazda 3 yet? I checked the Viper and Compustar websites and the 2019 isn't listed as officially supported yet. I was curious if anyone has had any issues after installing one considering it's a new generation vehicle.

Will adding remote start void new car warranty

key go into program mode but wont program

Hi I bought my Mazda3 2nd hand. Previous owner had a Code Alarm remote start installed. My keyfob went belly-up. Luckily I had the forethought to buy a dup a few months ago. Only problem is, I can't find the programming button/switch on the car that will allow me to program it to work with...

Hello. I have installed iDatalink to remote start on my CX5 and everything working very well. I just have a small problem with iStop, it not working if car start by remote by Lock-Lock-Lock on OME key (it still working if started by car's Start/Stop button). Has anyone got the same problem as...

Has anyone successfully programmed an additional key remote as per the service manual? (~page 6401)

Manufacturer: Mazda Part Number: BHP1-V7-630 Description: Genuine Mazda 3 Remote start installation kit. 4-door. NOTE: BHP1-V7-630 is the install kit *only*. When installing an OEM remote start you also need parts C930-V7-620A (Engine remote state) and KD53-V7-629 (hood switch (some trims))...

Hello. I dont like OEM Remote Start (part c930-v7-620) any more, so I'm planing to remove it. For hardware it just simple to unplug the 8 PIN connector, but how about remote key fob ? Am I need to unprograming to totally remove the remote system ? Thank you

Remote Start PART C960-V7-621 Hello. I have got a Remote Start Remote C960-V7-621 (key fob) for 2017+ model as below image: I dont like it, I like old model as below image So can I use old model's key fob for 2017+ model ?

Manufacturer: Mazda Part Number: GJY9-67-5DY Part: Transmitter Replaces: GJR9-67-5DY, GJR9-67-5RY THIS PART FITS Make Model Year Body & Trim Mazda 3 2018 Grand Touring, Sport, Touring Mazda 3 2017 Grand Touring, Sport, Touring Mazda 3 2016 I Sport, I Touring, i Grand Touring, s Grand...

I've seen that some other folks have had trouble with this. Here's the problem I'm encountering. - Yesterday morning, go out to the car, and the fob seems to be dead. The car doesn't respond to its proximity when I push the door-handle button, and the unlock button on the fob itself does...

Hi everyone, I am thinking about having an aftermarket remote car starter installed on my '14 Mazda3 iTouring. I was wondering if anyone else had experiences or recommendations for remote starters they've had installed? Has anyone installed an aftermarket starter and not had to turn the engine...

I have a compustar remote starter on my 2014 mazda 3 and after I remote start and open the door, the engine shuts off. Is there a takeover procedure for mazda push to start yet?

Hi! I was wondering, whether there's an option to remote open the trunk of the hatchback. I have seen a video of a MK7 VW Golf hatch pop kit upgrade. Of course it would require struts with strong springs, but also some OBD coding to enable popping the trunk via the keyfob. Not sure such thing...

I've replaced the bose amp with a kicker 800.5 amp, and it is all great with one issue. When i-stop shuts down the engine, when it restarts the engine, the amp loses power for a moment and the sound cuts out for a few seconds. I've tried tapping the grey "acc" wire coming out of the TAU, and...

Hello I'm new to this site and this is my first Mazda 3 Hatchback Touring. I would like to add remote start. Is the factory remote start any good or should I go with aftermarket and if so which one? All thoughts and opinions are appreciated. Thanks

Just out of curiosity, does my 2017 have a built in command start that gets unlocked via a bypass module? I've seen some info on starting via the oem remote by hitting the lock button 3 times and then it shuts off once the door is open. Am I way off base here?

Hello Mazda Revolution people. i need an help. i need to enable the Auto Door Locking option and here is my default R_BCM 7B7-01-01: 4550 0006 A3FE 7B7-01-02: A50C 4300 08BD 7B7-01-03: 0038 9010 9A 7B7-02-01: 0028 1098 48D9 7B7-03-01: 00C2 give me some options to add features..like the horn...

Hi Guys! How do i change the batteries for the remote key? I've been using the reserved key as of now. :crying2: