2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 17 Results
  1. 2014-2018 Mazda 3 Skyactiv Audio & Electronics
    Has anybody on here tried relocating the hub from under the dash, to inside the armrest? Wondering what all that would entail.
  2. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    I just got my new 3 Grand Touring 6MT with the safety and premium packages. So far I adore the car! However I'm not a fan of the location of the front plate, I think it looks pretty bad in the middle of the grille like that. Sadly it's required in the state of Washington. I live in the same town...
  3. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Does anyone have any other plate relocation kits for the tow hook area? CS and JBR are pretty pricey for what they do, but I'm sure theirs are high quality and reputable. Looking at ebay, there are cheaper options like this for less than 1/3 the price of CS/JBR: Mazda Mazda3 10 14 Front...
  4. Mazda 3 Parts - Buy / Sell
    I am selling a CORKSPORT License Plate Relocation Kit for $60+shipping. All screws are included.
  5. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    So I bought the relocation kit, everything installed fine except for the bumper plugs anybody who bought these have a hard time installing the plugs? Or am I not trying hard enough? If so are there any tricks that could help me fit them?
  6. 2014-2018 Mazda 3 Skyactiv How-To Guides
    I just want to share my DIY plate relocation mount which costs less than $30 for my 2014 Mazda 3 sedan and does not require drilling of holes since, like everyone else, I thought that the placement of the plate seemed out of place. These are the materials you need: 1. Plate Mount – From Ebay...
  7. 2004-2009 Mazda3Appearance & Interior
    So for today's Car Project ....Did a more aggressive Wire Tuck / Wire Relocation on my engine.... Here's the Before & After pics....Took about 3hrs to do & a lot of Blk Electrical Tape. On the Before Picture I popped some Red Arrows so u can see how much cleaner it makes the Engine Bay...
  8. Mazda 3 Parts - Buy / Sell
    Hey everyone! A few month ago I made my own license plate relocation and had some extra parts lying around to make more. Below is the kit you will get which will be ready to mount after a small amount of assembly(threading rod and tightening nuts). Parts will be plasti-dipped in black to prevent...
  9. Buy / Sell / Trade
    I make these myself. Been selling them on another forum for a few weeks with great reviews. They are fabricated from 1/4" solid aluminum plate Come painted black unless you want bare aluminum so you can polish or paint whatever color you choose I have done one or two anodized as test and they...
  10. 2010-2013 Mazda 3 Engine and Performance
    Anyone done an oil filter relocation? Every time I change the oil, when I unscrew the filter it ends up going all down my arm, makes a mess, and pisses me off.
  11. 2010-2013 Mazda 3 & Skyactiv Discussion
    So I'd like to put a front plate on my car, but not in the standard location - I'd rather not drill holes. So I found the CS relocation kit and got really excited, until I saw the price. :ohmy 1: Has anybody else done anything similar, at a much more reasonable cost? If so, ideas? lol. Thanks...
  12. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Ive read the instructions and looked through it. I was wondering, with the 2012's, there looks like there is already an OEM hole, covered with a cap, for a tow hook. If this is correct I wouldnt need to bore a hole in my brand new 2012 bumper right?
  13. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    I've gotten quite far on starting to make my own bracket that holds the actual plate and will post pictures as soon as i have this all figured out. I've ran into a bit of a problem with physically attaching it to the car into the tow hook up in front. Does anyone know what kind of bolt to use...
  14. 2010-13 Mazdaspeed 3 Appearance & Interior
    See thread here: http://mazda3revolution.com/forums/2010-mazda-3-performance-mods/2835-customer-collaboration-license-plate-relocation-bracket.html I had to choose a forum to post it in but it's the same product on any 2010 Axela, MPS, MZ3, MS3... Jason
  15. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    In the last few weeks at CorkSport, we have been discussing ways that we can be quick to respond to our customers interests and design components that achieve the requests and requirements of our customers design tastes. I have a few products that I'll be doing this with in the coming months...
1-15 of 17 Results