2004 to 2016 Mazda 3 Forum and Mazdaspeed 3 Forums banner

plasti

  1. Help can I plasti dip this?

    2014-2018 Mazda 3 Skyactiv How-To Guides
    Guys, can I plasti dip this? It has sensors right? thanks for the help!
  2. plasti dip project.

    2010-2013 Mazda 3 & Skyactiv Wheels and Tires
    Finally got around to dipping my wheels. Never been really good at spray painting but i gave it a try and it's not too bad. Not perfect but definitely a learning experience. I'm thinking about leaving it on for a few months then maybe trying a different color. Maybe a gold color?? I spend less...
  3. Plasti dipped emblem review

    Interior / Exterior
    So I've had my emblems dipped for about 2 months now and am ready to give my review. And I love it! I love in Arizona so the heat has not affected them. I've taken a pressure washer to them and still nothing. I used black first and it took 4 coats. Then used the vintage gold with 4 coats, and...
  4. Plasti Dipped Engine Cover

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Has anyone plastidipped their engine cover yet or any parts in their engine bay? How well does the plastidip hold up in the heat? Does it peel or melt after a while? I've found some other post of people plastidipping their engine covers, but none have updated on how well it holds in a mz3 2014...
  5. Plasti Dip After Removed Bumper

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hi All, Today I wanted a more professional way to paint my U in the Grill. So I used these directions to take off my bumper 2014 Mazda 3 Bumper Removal Then I was able to set the bumper down and figure out how to take the U off. if you have enough knowledge to follow the directions then i...
  6. Plasti dipped rear mazda Emblem

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Hi I wanted to share a easy and cheap mod. I plasti dipped the inner parts of the rear logo. Turned out well and looks sharp.
  7. Plasti dip bra and graphics

    2010-13 Mazdaspeed 3 Appearance & Interior
    Hi - I've not used Plasti-Dip , but have seen a couple of cars that it was used on. Anyway, I have a 2010 Hatch and driving on the freeway (I am in Denver) I'am picking up a few front end chips. I looked at Bras and had some on a few cars back in the "Old Days" and really did not like how they...
  8. Plasti Dip Anyone?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Anyone used Plasti Dip for a whole car conversion? I am really entertaining this for my 2013 M3 5dr... as I really enjoy bright Neon Green or some crazy Alien pearl colors... but it's pretty rough - the glossifier makes it glossy, but does it make it smooth?
  9. White with black plasti dip wheels

    2014-2018 Mazda 3 Skyactiv Wheels and Tires
    Does anyone have pictures of the their white sedan with place plasti dipped stock wheels. Possibly the touring ones? Debating if I want to do it.
  10. Quick question about plasti dip wheels

    2010-2013 Mazda 3 & Skyactiv Wheels and Tires
    So I'm thinking about plasti dipping my stock wheels but I heard sometimes the area where the nuts bolt in can get messed up and lift the plasti dip. What do you do to prevent that from happening ? Do you avoid plasti dipping around that area ?
  11. Plasti Dip Fun

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    So I just went out and got a couple cans of plasti dip and thought id mess around because i know its not permanent, so here are some pics and ideas of what you can do with it Rims Engine Cover Front Fascia Skyactiv Logo Front and rear mazda logo and the mazda 3 logo
  12. my white 2014 mazda 3 with vinyl wrapped roof anf mirrors plus plasti dipped grille

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
  13. Matte white plasti dip whole car?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Im considering plastidipping my 2011 mazda 3 sedan matte white except for the roof which I'm going to leave black. What do you guys think?
  14. Plasti dip suggestion

    2010-13 Mazdaspeed 3 Appearance & Interior
    So I wanna dip my car lol I can't decide on colors. I'm thinking of doing wheels and emblems and possibly the front bumper piece. I thought about doing black but that seems a little played out. What about blue. Has anyone done blue wheels, emblems and bumper?
  15. Plasti Help

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    so i just diped parts of my car and then when i peeled off the blue tape there was some red still on the black part of the car (i painted the silver part). any way to get it off... i don thave long enough nails and tooth pic is not sharp enough
  16. Plasti dippiing?

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Just wondering what anyone else has done with plasti dip, share some ideas!! Im working on blacking out my badges and emblems, and also tinting my headlights and tail lights, ill be uploading pictures of my project
  17. Plasti Dip Valance

    2010-13 Mazdaspeed 3 News & Discussion
    Hey all, I just plati-dipped my rear valance and it looks awesome. Even though it looks sweet, I noticed one issue. At some point, I accidentally touched it with my thumb so now there's a thumb print. It looks perfect and this was my second attempt as I had to peel it the first time. Is there a...
  18. Electric Lime + Violet Metalizer Plasti Dip...in progress

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Sorry to be a tease, but I just had to post my progress. I ordered an electric lime green wheel kit with violet metalizer finish. Since this is my first foray into the world of Plasti Dip, I am starting with the front emblem. That, and it is really cold and shitty outside, and I do not have a...
  19. Anthracite Plasti Dip

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Just had to share! Happy with their Anthracite color (5x Anthracite 2x Glossifier)
  20. has anyone plasti dipped their roof rack?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    hey guys, any of you plasti dipped your roof rack? i've been thinking about it, i figure it'll look pretty slick on the black mica. i just got a 2013 3 GX with the factory aero rack on it. also if anyone has done it how many cans did it take? i'm thinking about goin to crappy tire maybe...
Top