pattern

This morning I used my windshield washer and noticed that the center of the spray pattern from both nozzles was weak. That is, there was noticeably more spray on the sides of the V pattern from each nozzle than in the center of the V. I figured the windshield washer level must be low so I went...

Wheel Spacers 5mm, Bolt Pattern 5x114.3 mm, Centerbore: 67.1mm (Set of 4) From James Barone Racing I put them on once just to look at the result. Not even 1 mile on them. https://www.ebay.com/itm/232809906512

Hello everyone :smile2: , Is this pattern normal , you can notice this elliptic black spot , tried many different halogen bulbs with same result :| Thanks in advance :wink2:

We have some 2007 OE Mazda-3 16" Alloy rims that we put snow/Winter tires on. We are getting ready to purchase a new 2017 Mazda-3 Hatchback with 16" alloy rims. Will the 2007 rims mount on the 2017 vehicle? Will the 2007 tire-pressure units on those rims cause any issues when installed on the...

Hey guys and gals. I was wondering what the typical beam pattern for fog lights usually are. I was tinkering with the idea for installing Morimoto X.pods rather than pick up the OEM ones. Since I don't have fogs, I would cut out the shape onto the existing plastic housing and fabricate a custom...

Just wondering if anyone else's high beams look like this or if something is wrong here. It can be very distracting as it lights up things you are passing under.

I want to get new rims for my 2011 Mazda 3 2.5L GS. I am aware that the Bolt pattern in 5X114 for the Mazdas. I want to get these OZ racing rims 18" with Bolt pattern 5X120 and tire size 225\40-18 but i just don't know if they will fit. The rims came off a BMW. will they fit? and if they...

"Stock/OEM" Wheel size, offset, weight, bolt pattern, lug nut info needed! Situation: I just bought a 2014 mazda 3 ISV 4 Door Sedan, which comes with factory oem 16 x 6.5 steel wheels with hub caps that look horrendous and are extremely embarrassing >.< Goal: I want to upsize my wheels to...

I installed HIDs into my headlights, replaced the projectors with bi-xenon projectors that can go high/low (relay to a flap that goes up and down). The passenger side is a nice smooth light that has a sharp cutoff but the drivers side has a bright spot at the center (about where the step down in...

few questions if anyone knows.. ( I searched here and google ) Is the tranny bellhousing bolt pattern unique to the newer engines? or is it like a "standard" that mazda used on all FWD cars they make? Also ford uses this pattern right? ( I found info that the engine is "near" identical.. but...

Is the exhaust bolt pattern the same on the 2.3 as the 2.5? like will 2.3 header fit on a 2.5? please respond!