Hi guys, just wondering....is it normal that my bluetooth obd scanner stays powered on even when the car is off? Also what is the normal idling rpm? Mine fluctuates between 650 and 740. With torque app I noticed increase in vaccuum (going from -7.7 to -9.7 psi) and then the rpm drops. Is this...
Hi guys, I need some help. My gf has a 08 Mazda 3 2.0 AT. Has 300,000km on it. We had a engine light come on and the codes indicated bank 1 sensor 1 O2 sensor. So we ordered a O2 sensor via ebay special and installed it. The code never went away, and I didn't have the OBD code reader to follow...
I have a 2016 Mazda 3 with the 2.0 petrol engine. When playing around with an OBD reader, I found that even with the throttle pedal to the floor, the reader reports only 92% full throttle.
Has this been seen by someone before? Or can someone with a reader check it?
I am not sure if it is the...
I'm new here so be easy on me haha.
Doing some inspection on my 2014 Mazda 3 Hatchback I see a white connector just on top of the OBD port.
Does anyone know what is it for?
take a look at the picture.
MAZDA 3 SKYACTIV 6-speed manual transmission
Does anyone know where to find an OBD device that locks the doors when the car is going forward?
the device must have an external wire to be able to control a relay.
The first OBD safety lock models had an external wire to directly control the...
UPDATE: Problem resolved! See below for the steps I took to resolve this issue.
How to fix:
1. Buy this O2 Sensor from Amazon.
2. Rent and O2 sensor removal tool from your local auto parts store (I got mine at O'reilly's). This tool will help remove the sensor without pinching the cable.
at some point i'll need one of the diagnostic tools for my shiny new mazda. my old obd2 code scanner doesn't support CAN so i just gave it away to a friend.
would like to know what you guys use....now before someone throws a rusty wrench at my head, yes i did search and didn't find much. i'm...
Hi Everyone - I bought a new iTouring hatch last month and this is my first post.
I've got the Torque program and an OBD/bluetooth adaptor that I used in my old car, and I'd like to use it in my new one. I'm sure it's someplace obvious, but I can't seem to find the OBD II port. Online...
Hey everyone. A co-worker of mine has a frs and purchased this device, it was only 20-something dollars. Seems quite nifty. Plugs into the OBD port and leave it attached to your car while mobile. Then connects to your phone using a program. The main reason why I used it was to test my 0-60. It...
Just got an iPad 2 and a Griffin extreme duty case, would like a good way to mount it, thinking of this:
RAM X-GRIP? III Universal Clamping Cradle for the Apple new iPad, iPad 2, iPad 1, Motorola XOOM & XYBOARD 10.1
Plus: RAM POD I Universal No-Drill? Vehicle Mount with 18" Rigid Aluminum Rod...
This may be a dumb question and I know usually they're under the steering wheel but i can't find it! I did search these forums to see if anyone may have had pics, but i didn't find any.. Can anyone tell me where the obd2 port is and include a picture if possible, it would be greatly appreciated.
Is there supposed to be a cover or door over the OBD II port? I just noticed last night there is nothing over mine. Every other car I've owned has had a pop-off cover or a little door on the dash.
It's not a big deal...just something that made me go, " hmmmmm".
Recently picked up a DashDAQ XL by Drew Technologies from tunertools. This thread will serve as an introduction to the device as well as news and related things I can do it to help with getting info out of our cars.
It's a linux-based programmable OBDII/CANBUS device than can monitor/log...
Did anyone try to use OBD II scaner on Mazda3 yet? Because a friend told me that may cause the engine light lit. And it may cause the factory warrenty voided. Is that true? :confused1 1: