Search Results for ‘mounts’

I have a 2011 Mazda 3 2.0L with 125,000 miles. My motor mount on the passenger side by the coolant reservoir tank is going back and leaking fluid. im def replacing that but what other motor mounts does my vehicle have? and should I be replacing them? Thanks in advance

Hello everyone, I’m needing some critical feedback as to what I may need to look for when diagnosing my cars vibration issue. I have an ‘11 Mazda 3, and I had bought the passenger and trans mounts new because they were literally split in half lol so I got those out of the way (65ft-lb for frame...

Were can i find a diaphragm of all the mounts location on a 2005 Mazda 3

Im torn between these two options and am looking to get get some real world feed back as to which you prefer and why. JBR SkyActiv Lower Rear Torque Mount [SKY-RMM] - $139.00 : James Barone Racing, Aftermarket Performance 70-80A duromoter , $140 CorkSport...

Ever since I bought my 2010 GS a few months ago, there's been this noise from the engine, but only when its cold outside and only for about the first 30 seconds of driving - usually on my way to work in the morning when its below 10C/50F. The best way I can describe the noise is a squeaky...

Made a stupid mistake and ordered the wrong part number, then dislocated my shoulder and didn't find out these aren't the right size till long after the return period had expired. Test fit one bushing before realizing it, other than that they're untouched. Cost is $80 direct from...

I have a Mazda3 2004. I went to the mechanic today, they said I need to replace transmission mount and right front side engine mounts. They recommend using Dorman engine mounts. Does anyone know where to get these? I tried going to Dorman directly. Unfortunately, they no longer sell this...

Hey everyone, I've been searching for a few weeks now and the only options I seem to be able to find for engine mounts that aren't shit is ordering them from the states.. Just wondering if there are any companies in canada who make polyurethane mounts? I would really like to avoid the brokerage...

After driving the 3 w/ 6MT for well over a year now, I was constantly being jarred by the jerkiness at the transition point from accel -> decel, and the jerkiness at low speeds crawling around parking lots/over speed bumps and such. I could FEEL the motor shifting around in the engine bay as it...

Purchased these on a Kickstarter campaign. I bought a 6 pack and I am only using 1. Selling the other 5 for $15 shipped. These are pretty neat to mount your phone, sunglasses, ID/gate badges etc. Simply slide on to your vent fins. Shipping from SD,CA.

********ALL ITEMS SOLD******** ********ALL ITEMS SOLD******** ********ALL ITEMS SOLD******** ********ALL ITEMS SOLD******** ********ALL ITEMS SOLD******** ********ALL ITEMS SOLD******** ********ALL ITEMS SOLD******** Road Magnet 1.25" Springs. Came off a gen 2 MZ3. Should fit gen 2 MZ3/MS3...

I have two of the three OEM motor mounts purchased to fit a 2010 Mazda 3 2.5L They are both brand new still in the packaging. $30 shipped

Road Magnet 1.25" Springs. Came off a gen 2 MZ3. Should fit gen 2 MZ3/MS3. Had roughly 20k miles on them. Great comfy ride with a mild drop. Will be removed off stock suspension before shipment. Asking $75 local (DFW,TX) or will ship at $40 UPS ground additional cost. JBR 80 duro Rear Motor...

I was planning on getting the Corksport short shift plate and rear motor mount for my 2014 Mazda3 hatch 2.0L 6MT, and while perusing Corksport's site i noticed they no longer have listings for any Skyactiv rear motor mounts (M3, M6 and CX5). I contacted Corksport and was informed that they no...

Hi Everyone, I'm planning on replacing my front struts and rear shocks on my 2010 Mazda 3 5door hatchback. I currently have a little over 84k on the car. I was doing research on strut mounts. First off, what signs do I look for on a worn strut mount? Second, what brand of strut mount do you...

id like the stock left and right motor mounts shipped to 98270 please for my 2013 speed 3. thanks

Anybody installed something like this as way to add custom lighting? License Plate Mount - Vision X Lighting Thoughts on whether it would even work or look good?

I have 18k miles on my M3, and been driving 50 years manual transmissions. I own a 02 Ford ranger with 212k on original clutch and a 86 golf with 190k. Recently the Mazda has started to have a lot of bounce (surge?) at taking off slow in 1st in parking lots. Acts like a broken motor mount, has...

Hi, I'm driving the 2014 mazda 3 6AT for about 2 months now. For the last 3-4 weeks I'm noticing the following: (maybe they were there before, I'm not sure...) 1. The car is jerky when leaving the throttle in low speeds. It's especially noticeable in traffic jams when there's a lot of stops and...