2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 168 Results
  1. 2019+ Mazda 3 Discussion
    Hey guys, I’m looking for a phone holder and came across the one from “ProClip” which seems to be made for the car. They have 2 options and I was leaning more towards the one beside the vent. Has anyone bought this? I’d love to see pictures of it installed and get input. I live in Canada so...
  2. IMG_9322.jpeg

    Mazda3 TCR at Miami international auto show
  3. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    FINALLY, I did another mod lol. This time a CS Engine Mount. I borrowed a pair of ramps from a friend and it was easy. The hardest part is the pop clips for the under tray lol. After I pulled the oem mount I applied some light pressure to it and I cannot believe how much flex is engineered...
  4. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    Hi All, Does anyone have any experience in replacing their engine/suspension mount? Amazon only has 1 listed on for our which seems odd considering it takes more then 1 mount to keep it steady. I wanted to replace all the rubber mounts since I've noticed at idle at a stop, especially with the...
  5. 2010-2013 Mazda 3 Engine and Performance
    Good day, I'm the new guy. I tried the search engine without success. I need to replace the front/passenger side/under the coolant engine mount (commonly refer to as #3 ); can anyone provide the OEM P/N or other? Many thanks
  6. 2019+ Mazda 3 Discussion
    Hello, First post here. Recently acquired a 2019 Mazda 3. Any suggestions on what phone mount that will work? Tried a Wizgear mount in the vent directly to the right of the steering wheel and the phone was too low and angled downward. Thanks.
  7. 2010-2013 Mazda 3 Engine and Performance
    I have a 2011 Mazda 3 2.0L with 125,000 miles. My motor mount on the passenger side by the coolant reservoir tank is going back and leaking fluid. im def replacing that but what other motor mounts does my vehicle have? and should I be replacing them? Thanks in advance
  8. Mazda 3 Parts - Buy / Sell
    Filled a stock mount with 65 durometer urethane. Now, I will say that this mod will increase the NVH on the car significantly and that the driver's side mount (transmission mount) is a far superior albeit costly and labor-intensive mod. But this will also help lock down the drivetrain and really...
  9. 2010-2013 Mazda 3 & Skyactiv How-To Guides
    I was wondering if anyone could tell me how to find the passenger mount torque specs for the 2.5L engine or if it was the same for the 2.3L. Thanks
  10. 2019+ Mazda 3 Discussion
    Hello, new to this forum, in a way that I was never a member but always tuned in for other very helpful inquiries. Any who, got an 07 mazda 3 2.0 (manual) in June 18, there was no shaking at all at the time. Couple months ago engine started to shake at idle, ive heard from you guys that the...
  11. Vendor Deals
    <p class="p1">It’s no secret that there are a TON of smartphone mounts on the market right now, and given the sheer volume of dirt cheap offerings available across the web, it’s not always easy to separate quality from the junk that isn’t worthy of holding your long-dead 1st gen Motorola Razr...
  12. 2004-2009 Mazda3 Discussion
    Hey everyone, I was replacing the head on my 08 Mazda 3 and discovered that my #3 motor mount (passenger side) is in more pieces than it should be. I was looking online for a replacement mount and it suggested replacing ALL mounts at the same time. I'm wondering if this is really necessary or...
  13. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hi Everyone, For reference, this is for a 2014 Mazda 3 s GT 5-door. Where the cargo shelf sits on one side one of those posts that stick out snapped off. No idea how, no idea when, just that nows it's gone. It looks like it is part of a trim piece? Just trying to gauge the feasibility and...
  14. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    What’s everyone opinion on both, one or the other or none? I want to really pep up my Mazda. I know it’ll never be a race car (unless I drop a 5.0 L Coyote in it) but I want to do OV Tune and this is Mod I’m looking into.
  15. Mazda 3 Parts - Buy / Sell
    I need to replace the stock tweeters as I'm un-installing the audio system the previous owner put in. They've fucked up the stock tweeters completely and they're not salvageable so I'll need some replacements. If anyone has these I'm looking to buy. I'm located in Sydney Australia and will pay...
  16. 2010-2013 Mazda 3 & Skyactiv How-To Guides
    Hey everybody, I have just changed my 3 engine mount on my mazda 3 2010 GT 2.5, everything went well until I fastened the last bolt on the bracket that holds the transmission mount. Yep it snapped, right now its being held by 3 of the 4 bolts and there dosent seem to be any vibration when...
  17. Mazda 3 Parts - Buy / Sell
    Mount came out of my 2017 Mazda3 with 9000 miles. Some minor revisions over the years, but seeing as how a 2014 mount fit in my 2017, the reverse should be true. I cleaned and filled the gaps in the stock mount with 60A poly mount. I have the same thing (filled a spare 2014 mount and put it on...
  18. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    Made my own poly rear motor mount by getting the parts from a crashed car on eBay. Cleaned it up using a pipe brush and degreaser. Sealed off one side with duct tape and put it flat in a disposable take-out container filled with sand (so that in case of leak it wouldn't extend too far out)...
  19. Mazdaspeed 3 Parts - Buy / Sell
    I have a CP-E Rear Engine mount for sale. This will help with the planting power to the ground instead of everything being lifted up. I am selling because I no longer have my 2013 Mazdaspeed 3. I am selling for $105.00 Shipped that includes paypal fees and shipping. Paypal is [email protected]
  20. Mazda 3 Parts - Buy / Sell
    Hi, I'm basically selling my used Dash Din mount. It should fit 2004-2009 Mazda 3's and you can keep the original OEM radio installed. $10.00 and the buyer pays for shipping costs. https://www.flickr.com/gp/[email protected]/RMr40p
1-20 of 168 Results