Search Results for ‘mazda3’

Here's me yet again with another (possibly) stupid question. So, just the other day I started the car and immediately turned it off because I had forgotten something in my house. I know that some oil film usually remains on the engine bearings after the engine is shut off but I can't help...

So yesterday I decided to go for a ride and, without thinking, gave my car full throttle while overtaking just 8 minutes (5 miles) down the road, with ambient temperature being around 50°F. What worries me is that oil wasn't fully up to temperature and that I might have pushed the engine too...

Hello, I have a problem with my Mazda 3 4th Gen, it is the model without signature pack, so with the halogen DRL lights that I have changed with some leds. This was almost a year ago. Yesterday the car tells me that one of the two has burned out, I change it but nothing happens, the daylight...

So a week ago I gave my Mazda 3 a full throttle (WOT) to 3000rpm and now I can't shake the feeling that I might have caused some undetectable damage that'll eventually show up down the road. I have already made a similar post so I apologise, but I wanted to provide extra info for our resident...

So I've just about passed the 600 mile break-in mark and, stupidly, gave my engine full throttle in first gear. I didn't exceed 3000rpm, but I did push the accelerator all the way down after depressing the clutch, which caused me to worry about engine health. Is it possible that opening the taps...

Looking for a post 2013 third generation Mazda 3 hatchback with the 2.5 L engine under 80,000 miles or so and $16,000 or so preferably with a full service history. Must be automatic transmission. Let me know if you or anyone you know is selling something like this.

A. Item for sale/trade (model, specs, etc.): CERAMIC COATED OBX headers and flex pipe for first gen (2004-2008) 2.3L Mazda 3 (possibly any other 2.3L Duratec?), includes new gaskets also B. Condition: New In box, Used, Good, Fair, Dented, etc. - Brand new, ceramic coated but has some small...

Hi! This started over a year ago, when i had to change the rubber between the front and back doors. After a while I had to change them a second time and realized that's the problem wasnt the rubber, but my door is installed incorrectly. I also realized, that my door is hard to open and gets...

Hey all. Just bought this CPO 2019 Mazda3 with 25k miles. Clean history. This noise seems concerning. I hear it when I am driving, in neutral, or simply driving. Doesn't get any better or worse with increased or decreased speed. Let me know your thoughts! Here is a video link 2019 mazda3...

Hi all, From what I can gather, AA does not work well on FW 70xx? I am on FW 70.00.110 with the old USB hub, so no native AA. Can I downgrade my FW to 59 and then install AIO tweaks via USB and also AA? If so, how do I downgrade my FW from 70.00.110 to 59? And if I downgrade, do I need to make...

Hi all. I feel like the braking system on the 2.5t is soft as sh*t. It cannot slow down quickly unless pressing the brake deeper. I had searched around the internet and can't find anyone doing the upgraded braking pad. Does anyone have some recommendations?

I have a 2010 Mazda 3 2.0 manual, everything was working perfectly on the car, drives good, handles amazing, not a single complain, a couple of days ago, my lock switch stoped working outta no where, and it’s the model that has the door lock switch next the the steering wheel under the air vent...

Hi all. just got my M3 HB delivered and wanna add aero kit to make it look cooler. Since the official one is way too expensive, I check around the internet and see Bayson R has whole set of aero kit for new m3 in around $900. Does anyone heard about this brand or using their products? Or any...

I’m looking to buy a 2021 Mazda3 turbo stock muffler. If any one not using the stock muffler and looking to buy one. For a hatchback

I want my 2013 Mazda3 to sound like the Mazdas in these videos; link1 | link2 | link3 What's the most affordable way I can do this? I'll be taking it to an exhaust shop because I don't trust myself to get the job done correctly...I was planning on having them do a resonator delete but I've seen...

Hello guys, I own a Mazda 3 2010 spirit sedan, and I would like to modify it with nicer exterior, Front & Rear Bumper, Spoiler, Rims, Lips. Any ideas if Mazdaspeed 3 bumpers will be suitable? Or do you know a reliable store I can purchase cool stuff and ship it internationally? Thank you very...

Sunroof, heated seats, AC, speakers, dual-zone climate control, rain-sensing wipers, Bluetooth, night-adjustable rear view mirror, 17" wheels with Hankook Ventus V2 concept AS tires. All features work great. Very clean interior, no rips or stains in seats, and like-new fabric. Detailed every...

I'm thinking of either getting the corksport lowering springs for my 2015 mazda 3 or coilovers. I'm stuck between the two as I can pay a lot less now and just get the springs, and in the near future 1-2 years I'll have to end up replacing my stock struts anyway. Or should I just bite the bullet...

I have a 2010 Mazda 3s 2.5 and I get 26.3 average. Just curious what mpg you guys get with any model or year Mazda 3 modded or not.

Now reading around a bit, I've come to know that Mazda's stop start system is a bit funny. But I genuinely don't understand why mine doesn't work. I drive 15 to work and back each day, a mix of city driving and dual carriageways so plenty of time to charge up the battery. Yet whenever I look at...