So I've been doing a little reading and stumbled on the CorkSport aftermarket exhaust write up and did a little extra reading as to why the exhaust headers were designed in such a way by Mazda in the first place. I guess due to the high compression it creates a very hot exhaust charge and the...
Recently I have just bought a 2017 Mazda 3 2.0 155hp US import, I'm located in Europe. The car has a badly cracked intake manifold besides other things and runs rough:). I would like to replace this manifold with a OEM part. The issue here is that when I talked to my local Mazda dealer and...
If you haven't heard we are currently in the process of producing an exhaust header for the 2.5L.
In the mean time check out the OE exhaust flow and see where we are making the improvements on exhaust scavenging.
Go to CorkSport . Com and check out our Blog!
My best guess is some sort of baffle for noise reduction as it is not attached to anything, just bumbling around in the void under the intake runners above the plenum. If you feel around, there are a couple more foam blocks that are attached somehow in that same space, anchored to something...
New Mazda 3 owner here and loving it so far! Well, new to me anyways. I recently bought a 2014 i Touring 2.0 with a 6 speed and have done some preventative maintenance to know that everything is in working order. One of the things I found out is that this has a PCV valve that is...
Thoughts on up pipe placement for this manifold (2.5L sky)? I was thinking having it begin before the flex, which would be replaced by a very short one(after the flex is too cramped). Then having a t3 flange on the exhaust inlet end of the pipe (no wastegate provision).
I feel like I've been researching the process for removing the intake manifold for weeks for my 2010 Mazda 3 2.0L Hatchback. I'm 100% ready for the hassle of the centre bolt. But there's a few things I don't understand (I'm fairly new to working on my car).
1. I've read the guide for the VTCS...
Does anyone know what this sensor circled is called on my intake? manifold absolute pressure sensor? but I bought a new one and it doesn't fit.
Amazon.com: Wells SU2323 Manifold Absolute Pressure Sensor: Automotive
My 05 Mazda 3 is throwing out cel p2229 barometric pressure high so I thought...
I did a video on how to install the JMF intake manifold with 4 port meth injection. Hope this helps anybody looking to install this themself.
Hey guys kind of new here and just had a few questions. Well the title says it all, will a 2010 mazdaspeed3 exhaust manifold fit on a 2010 mazda 3 2.5? Im planning on boosting my 3 and I pretty much have everything all planned out. If it does fit, where can I find one?
Hi guys i need some help, my check engine light has been on for 2 weeks, i have had it tested twice and been told one my octane levels are low, which should be fixed now. But the other was a manifold malfunction, but they didnt no whats causing it. what is it??