Looks like this is coming soon: https://www.mazda.com.au/accessory-pack/BPSRLS It was always standard on the premium models of the 3rd gen, seems to be missing entirely for the 4th gen..

Searched everywhere but I couldn't find it. Any idea guys? Thanks.

17" Enkei EV5 wheel and tire set. Pristine! Hyper Black w/ Machined Lip - $500 (AZ) Selling this set of 4 wheels + tires that I just took off my Mazda3 before selling it. Everything was purchased brand new a few months ago new from Tire Rack for $1,046.96 including shipping. They have about...

What’s the best front lip for a 04 Mazda 3

Hi everyone, long time lurker finally posting. I've had my mazda for a while now and some exterior parts started to interest me. I decided to bite the bullet and I ordered a rear diffuser confident I would be able to fit it myself. The diffuser I ordered was the MV-Tuning one from Russia (it...

Anyone seen the Gen 3 hatch with rear lips/aprons? I'm trying to find some that could work, but have not had any success. I've installed the front lip, will soon install the side skirts, but am missing pieces to add to the rear bumper to complete the body kit. The only thing I've seen is the...

Hello everyone, I traded my 2015 Mazda3 sGT in for a truck since we are excepting a child I needed something bigger. 14+ Front Lip Mazdaspeed - No hardware no installation instruction, I've left the lip in the garage for too long, it twist a little bit, but nothing a heat gun won't fix, 8/10...

Any of my fellow mazda3 hatch owners used the EZ lip front lip instead of spending a small fortune on a diffuser?? Thanks in advance for nay info

I'm wanting to get a front lip for my 17 GT hatch, however all the ones I've found on eBay with a reasonable price just are ABS Plastic which I don't prefer due to durability issues. I've always went for urethane material. I see BaysonR has one with that material, but only for 14-16 3s. I was...

HI all, my dog has chewed the extreme left part of my plastic body kit on my mazda 3. theres lot of teeth scratch over 5 cm and also few holes. is there a way that it can be restored?

Hey Guys You might be able to help me. After doing a few searchs on the internet here and there I can't seem to find a decent front lip for my BL hatch. I'm in Australia by the way, but so long as they deliver I don't mind where I have t buy it from. I found this one that I have attached a...

Hi all, just installed my new front lip from ZestJDM for the 2017 facelift. I painted in glossy black. Give me your thoughts.

finally i found an aftermarket lip for 2017 facelift: https://www.zestjdm.com/product_p/mz3-14-fs-mz7.htm have someone found this on ebay or something? i'm not sure about this website... EDIT: link updated EDIT2: Lip arrived...

Had a little scrape on my bumper lip, and am wondering how to properly reattach this on the drivers side. The whole lip is mostly attached by two-sided padded tape, and there are some clips on the corners. As you can see, the lip's clip has come free. Are these originally attached with sticky...

Does anyone know if the 2014-16 lip from BaysonR will fit the 2017 model? Also, has anyone seen any new lip created besides OEM that says it will fit the 2017 HB? Thanks!

So today my car gets its first ding from some %^!$& dolt. On the passenger side front wheel well, it should be fixable. However, that makes me want to install some rubber lip protectors to help prevent future dings. Had some of that on cars many years ago (real common on '80s Hondas), but...

Hi. I want to buy a front lip for my M3. I know the best material is the urethane and BaysonR is the most recognized brand, but the model of the lip don't like me so much. Anybody have more pictures about the other lips? BaysonR Best Racing Motors (urethane) Ikon (abs) Thanks

Hey ladies and gents I was just wondering if it's possible to fit the lip on my 2013 mz3. The authentic GV lip for the 2013 is pricey so I thought I can try using the 2011 GV rep since they didn't have replicas for 2012-2013 mz3. Does anyone know if it will fit?

I got this aero front lip on eBay MS-Style Front Lip (Polyurethane) Fits 14-16 Mazda 3 4/5dr, from Baysonr has anybody installed one on there Mazda3? It only cost $85 Later