Hey diesel owners. So after the relevant recall on the throttle body (intake shutter valve) I decided to check for any carbon deposits and I run into an issue. i cannot remove the hose from the intercooler to the intake shutter valve. I have to somehow unlock this thing. Anyone know how this...

Hi All, We got a 2010 Speed3 and we think it has a suspect blow-off valve. We'd like to put the original turbo intercooler bypass back on while we figure out a 'good' blow-off valve to get. Don't want to pay retail for it, so if someone has one lying around in a drawer, please let me know...

Used intercooler in good condition $50 obo

Mazda 3 Odula intercooler info Thought id post a separate thread on info / chat about the Odula intercooler for the 2.2 diesel engine..... Best to be sourced direct from Odula here... ODULA RX-7 Mine took approx 2 weeks to arrive in UK from Japan, but a few days delay was caused by a major...

Details: JBR TR8 Mounting brackets for the Threasdstone TR8 Intercooler. Constructed out of heavy 12ga Stainless steel, these brackets are more than strong enough to support a Treadstone TR8 intercooler as well as relocate the factory power steering cooler. All necessary mounting hardware is...

Have to decided to let go my Cobb intercooler core. Asking $275 + shipping or obo. There's no piping, just the intercooler itself & brackets to mount it. This intercooler allows you to retain your stock crash bar so you don't have to cut your crash bar whatso ever. I removed as much pebbles as I...

Alright peeps, got me a JBR crash bar and a Treadstone TR8L intercooler. I opted for the "L" version cuz I have the cobb pipping already and the "L" is the same length as the cobb intercooler. Over all it's nice. Haven't pushed it but driving around seems like the BAT's dropped nicely. The new...

Guys I have some concerns that I need clarified Yesterday I was reading on some articles on internet about intercoolers and there capabilities. What caught my attention was "bigger is not necesarily better. It was stating that there are some cases when you can have turbo lag or the car takes...

Hey guys. I recently install the open mouth grill and it called for a bigger core. So i replaced my cobb intercooler for the TR8L core. And a friend of mine fabricated a custom crash bar that fits and looks amazing. check it all out in this vid. Thanks...

Hey guys I'll be going BT in a few months and i was looking to get a bigger core for my car. I see that mishimoto has a nice core that is 31"x12"x3" but the inlet/outlet is 3" and our piping is 2.5". Can use a reducer in both sides? is that something that can be done or is it better to get a...

guys just want to know if those of you who have deleted your resonator, did you notice any lost in torque or backpressure? I'm asking because I've been reading and came across this article stating that it gives you noise but you loose backpressure so that been said I want to know from those of...

Ok guys I'm writing because I want to get some reviews from those forums members that have instaled top mount intercooler. I like all brands but just don't know which to get. ETS, cpe, corksport etc. So if anybody has any of these installed, please let me know your experience because this is a...

So I installed a catch can over the weekend and in doing so broke the pcv valve, being that Mazda was closed and parts stores saying they'd have to order it I took it out went to AutoZone and found one that fit the hole and o-ring perfectly, hoping it would do the same I put it in and installed...

Hey all, Thought I would share what i have found out regarding using Street Unit's Top Mount Intercooler on the 2010 MS3. StreetUnit Top Mount Bar & Plate Intercooler: MAZDASPEED 6, MAZDASPEED 3 According to Mark with Street Unit: "The one we have works. We just don’t give you a shroud if...