intake

First time posting here! I was considering swapping out the stock intake for this AFE Takeda intake seen here: Takeda Stage-2 Cold Air Intake System w/Pro DRY S Filter I know cold air and short-rams have their respective issue with water and heat respectively. However this seems like the ideal...

I have a very light used (`10k miles) K&N Air filter that will fit stock car air boxes. I am sure everyone knows the benefits of these things. Its a cheap upgrade that can give you a slight boost on all around performance, and even if you're not interested in that you can save some money...

Hey diesel owners. So after the relevant recall on the throttle body (intake shutter valve) I decided to check for any carbon deposits and I run into an issue. i cannot remove the hose from the intercooler to the intake shutter valve. I have to somehow unlock this thing. Anyone know how this...

i've been promising around here to pull my intake and take some pics of the valves for better part of 2 years now. i also had a kid 2 years ago, so this has been long delayed. but today i did it! below you will find some images of the intake valves in my engine. i will attempt to approach this...

Hi, I bought a 2015 3 GT 6M, the previous owner had put this intake system and I was not a big fan of the increased noise it made, I put the stock airbox back in it. Here is a pic of the actual unit (attached) Here is the link to CS page corksport.com/2014-mazda-3-short-ram-intake.html...

2018 Mazda 3 2.5L L4 Fuel Injection - Except Turbo 3-4 Months old and is in great shape. K&N Filter w/water resistant mesh tube mounting plate and hardware $200. CDN + shipping is extra

Does anyone have experience using an aftermarket cold air intake for the 2012 Mazda 3 Skyactiv engine. I've searched on K&N but all the options end saying "w/o Skyactiv engine." Is it not recommend I'm at the 111k mile mark I'm well out of warranty. My concern is will I need anything up. I'm...

https://mazda3revolution.com/forums/2014-2018-mazda-3-skyactiv-engine-performance/116362-2-5l-full-cold-air-intake-installed.html Has anyone checked this out, would it be more worthwhile to do this if I was to get a tune at the same time? An AEM CAI is my go to for now with an OV Tuned on 92...

Good evening all, I was doing some browsing tonight and checking out some cold air intakes. I'm not here to debate their effectiveness, but instead looking for some clarification. Specifically, AEM intakes, model 21-773C (aemintakes.com/search/product.aspx?prod=21-773c). It's a short ram...

Selling my K&N typhoon air intake. Used on a 2015 Mazda 3 M/T. Can be used for 2014+ Mazda 3 skyactiv. Here is the link if you wanna see pictures. https://charlotte.craigslist.org/pts/d/cramerton-kn-air-intake-mazdaand-up/6775405223.html Price $150 for Mazda 3 revolution members plus shipping...

I have these three products, short ram intake , Cold Air Box, and front strut tower bar. Cost new is 479.97 For a 2017 Mazda 3. make me an offer. less than 7000 miles on the car when I traded it.

This is a used Corksport 2.5L Short Ram Intake I had on my 2016 2.5 3s. Will ship in original box. Basically like new except the filter could use a clean (it's not filthy, just used) Includes everything that came new except the instructions, but you can find them online if you need them (you...

Now that I do not have my 2011 MZ3 any more time to sell off a couple parts! I'm selling my AFE Takeda Cold Air Intake for the 2010-2013 2.5L MZ3s. This CAI actually routes down to the bumper, getting that nice cold air, coupled with a tune it sounds and performs great! I drove on this setup...

Nothing wrong with it. Just need cash. It’s in my car 2016 Mazda 3 -2.0 engine manual transmission. $100 OBO Local only . I’m in riverside/ Moreno Valley / Ontario Southern California area. Sent from my iPhone using Tapatalk

My best guess is some sort of baffle for noise reduction as it is not attached to anything, just bumbling around in the void under the intake runners above the plenum. If you feel around, there are a couple more foam blocks that are attached somehow in that same space, anchored to something...

My 2011 Mazda 3 has 167k miles on it. It has been having some issues with a slightly rough idle, and an even rougher time accelerating from a stop. I saw a recommendation to try the seafoam intake cleaner.... And wow. The car is running like it is brand new! All of the power I have been missing...

Hello Forum. Ever since I installed a SRI from HPS performance on my 2012 Mazda 3 Skyactiv 2.0L, i’ve been noticing a rumble when on throttle from 1k-2k rpms. I have a OVTune but it didn’t make the noise vanish which I didn’t intend it to. The only thing i can think of is an air straightner...

Is there a piece of hardware I need to be able to monitor intake temp from inside the cabin? How do you guys watch your intake temps? Cheers

Hey I have a 2006 2.0L Mazda 3 hatchback back and was wondering what you guys would reccomend would be the best cold air intake for the most power

Looking to purchase a used Cold Air Intake for my 2014 Mazda 3 Sedan.