2004 to 2016 Mazda 3 Forum and Mazdaspeed 3 Forums banner

insert

  1. New seat or insert

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    2016 SGT wagon. I need a better seat, long legs. I need more lumbar, support to my knees, bolsters. Help!
  2. Driverside rear bumper insert??

    2014-2018 Mazda 3 Skyactiv Engine and Performance
    Looking to make a singe exit exhaust for my car out the passenger side. I noticed there is a provision for a cover on the drives side in the area of the exhaust tip. Many might have not noticed. Curious if anyone knows of such a thing? As it is not avail in the U.S.
  3. GV Grill Insert for 2011 Mazda 3 S Hatchback

    New Member Introduction & Forum News/Guide
    I've seen all these grilles all over the place. I've been searching for the longest time and can't seem to find it. One last question, will it fit my specific model? If anyone has a link to one, that would be great. Something like the one in the pic, but for an S, not a Speed3
  4. Insert TMC licence

    2014-2018 Mazda 3 Skyactiv Audio & Electronics
    Hello. I'm from Europe. MZD navigation system in Europe use TMC (informations over the air) for Traffic informations. The problem is, that in my country - Slovenia - TMC don't work because Mazda didn't "insert" TMC licence for Slovenia (they save money). When i drive in Austria, Italy - i...
  5. B<2010+ Mazdaspeed 3 Front Grill Insert.

    Mazdaspeed 3 Parts - Buy / Sell
    Im looking for a used 2010+ Mazdaspeed 3 Front Grill Insert. Prefer in SoCal for local pickup. But still interested if elsewhere. PM me thanks.
  6. How to remove front bumper and grille insert

    2010-2013 Mazda 3 & Skyactiv How-To Guides
    So there has been a few threads created mainly asking how to remove the grille inserts on the front bumper. Here's how it's done. Hope this helps. :wink: Shouldn't take no more than 30min. Tools needed: Phillips screwdriver, Small and Medium Flat head, 8mm and 10mm socket with ratchet. Keep...
  7. How to DIY Door Panel Insert

    2010-2013 Mazda 3 & Skyactiv How-To Guides
    How to DIY your door panel inserts. Hopefully you already know how to remove your door panels. If NOT, A search for "door panel remove" in the forum will help. Materials: Red Leather (lamb skin) Bought from Tandy Leather Factory 3M Yellow Super Trim Adhesives x2 (need for 4 doors) Philips...
  8. Paint Code for the Grille Insert

    2010-13 Mazdaspeed 3 Appearance & Interior
    Hi all, Im looking for the paint code for the smiley insert for our grills. Do any of you guys know where to find it besides the drivers door jam, as it lists only the main body color? Thanks
  9. Painted Front Bumper Insert

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    One of the only things I disliked about my 2013 MZ3 was the matte black plastic bumper insert...not only the material but the color makes the mouth gape a bit too much for my taste (unless you have a black car). The other is the same black plastic they used to make the cup under the front grille...
  10. WTB: 2012 MS3 hood and grill insert

    Mazdaspeed 3 Parts - Buy / Sell
    looking for 2012 MS3 hood and grill insert. please let me know if you have one available and how much + shipping. If close to TN, I will be able to meet and pick up
  11. axela vs stock bumper insert

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    has any one experimented with the axela front bumper yet? do i need to remove the bumper and foam insert to make the axela bumper fit on my car? i dont feel like driving my car in such an unsafe manor if i do have to remove the bumper (not the plastic skin but the actual piece that takes...
  12. 2010 paint code for trim color (front bumper insert)

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    does any one know the paint code for the front bumper insert. it is a metalic gray. it doesnt look like the metalic gray offered in the 2010 mazda 3 its slightly different. i am ordering 16w metalic black to paint over mine.. i like how the 2012 front bumpers look so i am doing it on my 2010...
  13. Mazda 3 Grill Insert Concepts!

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Let me make it known I am a fan of the grinning grille, but I had some down time at work the other day so here is one idea. I started a couple others, I'll post when I have some more free time to tweak them. enjoy.
  14. Cons of the CS RMM insert?

    2010-2013 Mazda 3 Engine and Performance
    Thinking of doing something to my car since my Vegas trip has been can'd. I know with the dog bone, it produces a pretty good amount of cabin vibrations, and the AWR tends to rip just like the stock one. For as cheap and easy mod the CorkSport insert is, I might just go with that, instead of...
  15. Corksport motor mount insert help

    2010-13 Mazdaspeed 3 Engine and Performance
    Hi guys my stuff has jsut turned up from corksport, which im chuffed about the SRI/TIP looks fab and cant wait ti get fitted with the forge recirc. jsut a quick quesion if anyone knows the answer if anyone has fitted them. i ordered the motor mount inserts, how many motor mounts is there (i...
  16. Insert ignition key here...

    2010-2013 Mazda 3 & Skyactiv Discussion
    I have had my Mazda 3 for about 4 days now and every time I get in the car, flick the key open and go to stick it in the ignition and it has a very unnatural feel twisting the key to fit to go in versus every other car I have ever driven. Does anyone else have that same feeling?
  17. corksport intake and rear mount insert

    2010-13 Mazdaspeed 3 Engine and Performance
    I may be wrong but i may be one of the first to have the new CORKSPORT intake and rear mount insert instaled on my speed 3 had it done about 10 days ago and i am impresed with not only the quality and workmanship but also the preformance and ofcorse the nice sound when you get after it oh yea...
Top