2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

holder

  1. How to take off the license plate holder

    2014-2018 Mazda 3 Skyactiv How-To Guides
    Hello, Does anyone know how to take off the license plate holder from my Mazda 3 2017 hatchback? Thanks, Joe
  2. USB type C charging cup holder

    2014-2018 Mazda 3 Skyactiv Audio & Electronics
    I'm trying to get a charging cup holder like this[1], but with an internal USB Type C port. Also I would want the charging to happen from an USB port, not a lighter port. Does anybody know something like this for our cars? [1]...
  3. My phone holder recommendation..

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Just my input.. Sits perfect and does not obscure the ac. Just dont mount on dash since i heard it leaves a dent in the soft material. Iottie flex 3
  4. Fog light cover help please!!!

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    I needs some help finding a couple fog light covers. I've looked all over the Internet and have some up with nothing. So here it is. I need the ones that are in a kit I found on this site but it doesn't say where you can get a set. I'm looking for fog light covers that have the two ribs that run...
  5. Universal Phone Holder \ Dash Charger Install

    2014-2018 Mazda 3 Skyactiv Discussion
    Hello all, I hope this help someone, I've always liked my phone close at hand mounted below the dash, but I hate windshield suction mount and vent clip mounts as I feel that they're flimsy. At the sametime I didn't want to drill into my dash to mount the ball for my ram mount so I did a combo...
  6. Mazda Mobile Phone Holder - Why don't we have stuff like this in the US??

    2014-2018 Mazda 3 Skyactiv Discussion
    I just stumbled upon this video from Mazda Australia, on Youtube... Mazda Genuine Mobile Phone Holder (edit: how do I embed videos from youtube?? i've seen it done before) now, I know they may avoid stuff like this in the US for safety reasons.... but honestly, why are there so few...
  7. How to adjust door holder?

    2004-2009 Mazda3Appearance & Interior
    Mazda 3, 2008 model. I have just put on a replacement door (passenger side, rear). Everything is fine except the 'door holder' (the little bar that stops the door opening too far). 1) the bar doesnt stick out far enough 2) the hole on the bar is smaller than the original, so the bolt I have...
  8. bulb holder help,please!

    2010-13 Mazdaspeed 3 Appearance & Interior
    Hi guys i need your help here please. im on vacation with my family and last night i noticed that one of the license plate light bulb holders was hanging from the bumper, both side clips where gone. I called the junkers but they want to sell me the whole assembly when all i need is the bulb...
  9. Need to find a replacement License plate light holder

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Can someone point me in the direction on where i can get or buy a replacement holder for my license plate light. not the electronic part but the part that has the clips on it. the one on my drivers side one of the clips broke and i want to get it replaced
  10. Rattling sunglass holder

    2010-2013 Mazda 3 & Skyactiv Discussion
    Hi, I had my car for a couple months and started noticing a rattling at the sunglass holder compartment area. There is no sunglasses in these so it isn't that. When I hear the rattle, I push up on the sunglass holder and the sounds go away. Could there be something loose ? I hear this noise...
  11. Where to buy a tail light bulb holder??

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Where the bulb connects the the plastic The plastic holder chipped and won't stay I was wonderingif anyone knows where to get it. If none of you know it's a grey socket that holds the bulb in place. If anyone knows where to buy one please let me know
  12. LEDCup holder NO DRILLING required.

    2010-2013 Mazda 3 & Skyactiv How-To Guides
    FORGIVE ME this is the first post of how to I have ever done. Hello and hope this helps some of you that are hesitant to drill, I looked at several other posts to see how to remove the cup holder and decided to do so to put in LEDs for my cup holder. I for one am LAZY and want to get results as...
  13. Adding Door Pull / Cup Holder LEDs to Rear Doors

    2010-2013 Mazda 3 & Skyactiv How-To Guides
    I always thought it was cheap-o of Mazda to not add the LED door pull lighting to the rear doors and felt that would have really made the car a bit more complete in respect to the interior lighting.. So I added LED’s to the door pull and door cup holders and here’s how I went about it. I used...
  14. Dual Lighted Cup Holder Mod

    2010-2013 Mazda 3 & Skyactiv How-To Guides
    Dual Lighted Cup Holders To expand on someone else’s excellent idea’s…(drewzilla1981 and a few others for sure) I set about to do the cup holder mod and what I found was that from the passengers point of view the leds are a bit glaring to the eye and being a bit older than probably most of you...
  15. Odd plug/connector in change holder?

    2010-2013 Mazda 3 & Skyactiv Discussion
    Has anyone else noticed the strange connector in the tiny storage compartment near your left knee if you're sitting in the drivers seat? Anyone know what this is for?
Top