Search Results for ‘gen2’

Was wondering if the coilovers for mazda 3 bk gen 2 fits mazda 3 bm gen 3. Since the suspensions on these cars are really similar

My 2010 Mazdaspeed 3 (114k miles) had recently developed a misfire in cylinder 4. Changed spark plugs and cylinder 4 was pretty rough looking. Swapped around the coils to make sure that wasn't the cause of the misfire and sure enough, the misfire stayed on cylinder 4. I knew the injectors needed...

2011 Mazda3 Grand Touring w/ tech package, manual transmission Key fob works great, both locking and unlocking Lock button on door works great (both passenger and driver side) Unlock button doesn't work (on either passenger or driver side) Any ideas on what the cause might be? Should I try...

Hey fellow Mazda owners, I just wanted to get people’s opinion on whether or not my current cars wheels, 18 inch Gen2 Speed3, may have any clearance issues on my new 2019 Mazda3 GT Premium (on order)? My concern is that these rims are 225 width and the stock 18 inch wheels are only 215. I know...

hello, just picked up a 2010 speed3 and love it! looking forward to see what its all about lol! thank you all!

FS Gen2 Part Out 2011 2.5 Mazda 3 hatchback Part Out. Buyer pays for shipping, unless you are in the Bay Area I would be willing to meet. -Rally Armor Mud Flaps, used for about 1 year. Includes all hardware - $90 -Whiteline Endlinks, used for about 1 year. One of the endlinks ball joint is a...

Hey guys, going to finally do more mods to my car, after I get a rear sway bar, I am going to get an exhaust. I know Borla is a great brand but I can't seem to see options for the gen2 sedan, unless the hatch/speed3 version can fit on the sedan. But what are some other options for the gen2 sedan?

I know people say that the rear sway bar upgrade is probably the best noticeable performance upgrade after wheels/tires. I am wondering if getting a front sway bar too is going to be the same level of noticeable performance or if its not noticeable and I just stick with a rear sway bar. Edit...

Hello, I have a single exit exhaust rear bumper cover for the 2010-2013 Mazda3 hatchback. It came off of my 2013 Mazda3 skyactiv with only 40,000 miles. Only reason for selling is I fit a dual exit bumper to my car and no longer have a use for my single exit bumper. The bumper paint code is 38R...

Hello all! So I got a hit and run on my rear bumper. Collision shop says it’ll take about a $1500 ?to repair. So I went and found a decent rear bumper for the MS3 but I have 3 2.5L. Are they compatible? I did google this and all I can find are the hood and front side panels are not compatible...

Hi guys I am looking for a used rear sway bar for my 2011 mazda 3s sedan. please post what you guys got. list the price and how many miles has it been used.

Getting rid of some suspension parts and went back to stock. All parts are off my 2011 mazda 3 hatchback. -Corksport RSB with CS Billet Bracket (one note, the softer setting hole where the endlink goes was made bigger to fit the whiteline endlinks since they were a bit bigger than stock) -...

I have searched the forum for the last 2 days trying to find sake posts with no luck. Selling my 2013 Mazda 3 iGT and I need to return to stock height. I can’t seem to find mine, so I need to buy a set if anyone has one laying around. Both front springs and both rear springs. Thanks

Hi guys, I just wanted to know if anyone has tried putting the aftermarket gen3 spoiler on a gen 2 and whether or not it will fit.

Please read and follow the market place rules - http://mazda3revolution.com/forums/mazdaspeed-3-parts-buy-sell/58-marketplace-rules.html

Hey guys, After 124k, and some admittedly rough driving, my factory clutch on my 2010 MZ3 S is slipping when that good torque comes on. Specifically, I'd like to see if a Gen1 clutch will work with the Gen2 2.5/6sp combination. I have perused RockAuto and there are a few clutch kits that have...

I am trading in my Gen 2 Mazda 3 for a Gen 3 Mazda 3, so I'm selling my Racing Beat axle back exhaust for Gen 2 Mazda 3 hatch I'm located in Vancouver, British Columbia. Let me know. Thanks.

Turbo Inlet stock needed...

2011 MS3 (w/ 56k miles) complete car part out. I have not removed everything but wanted to start a post to prioritize some of easier removable items. Almost everything will be available for sale minus parts required to keep it as a roller. interior and engine is already out. All aftermarket...

Just picked up a crystal white 2012 MS3 w/ tech package. This is my first turbo car. Doing quite a bit of reading here and elsewhere (lots to learn!). Plan to get the car detailed this weekend and over Christmas break I'll install a CP-e stage 2 RMM. Probably will follow with Accessport, then...