The stock setup of the high beams running at half voltage as the DRLs is bad for the filament of halogen bulbs. Halogens need to run at (near or over) full voltage for the actual halogen cycle to work. Lifespan and luminosity are both negatively affected with the stock setup. Inspection of...

Hello, I've sold my '16 GT sedan, so looking to sell my Morimoto LED fogs. No issues. Worked great. These were used for about 1.5 years...so they have a little wear on the lenses from highway miles. Asking $90. Private Message if interested. Tks,

Another case of a product being the best of its kind, yet falling short in key areas. Morimoto is a well known name in the HID retrofitting industry and their projectors are generally really nice units. Having read the glowing reviews of this particular fog light retrofit for our cars, I was...

SOO just checking to see if anyone has installed aftermarket OEM fit fog lights with an after market Toggle switch vs using the OEM switch? i didn't realize it was prewired... until i popped the bezel off. kinda wanna make em operational instead of waiting for an OEM switch.. and this way i...

good evening everyone. I have finally started building up my gen 2 mazda 3 hatch. I am looking for any or all of the following to get me started: Wheels: RX8 or Speed3 10 spoke Intake: Corksport Short Shifter Exhaust: ideally corksport but open to other options suspension: Pro kit, Koni...

Wow. That's all I gotta say... I bought these things on a whim because I know they're a rare part -- bought them back in March I think it was knowing they were going into pre-order for a manufacturing run. Well they finally came yesterday. Installed them inside of 10 minutes and turned them on...

Anyone have pics with these in yellow? Functionality wise yellow is supposedly better but I'm curious how they look. Preferably on a blue reflex but ill take any color for reference. Thanks in advance.

Hi folks, the other day in the highway i hit a wood stick that was laying on the ground. i tried to avoid it but was nearly impossible because of traffic. Good news is that nothing happened to the car except that i made a small scratch in the bumper and also the silver piece next to the fogs...

As the fog lights are basically useless, I was wondering if there was a set up that would use them for longer distance /higher speed night driving. Would this be effective as they are much closer to the ground? Is it a simple bulb replacement? What needs to be done wiring wise to have them...

Hi guys need some help just got Mazda 3 1.6 sport 2012 every thing great apart from as title says nothing happens when I try turn front fogs on and drl lights just don't work but if I turn car off few second later the drl do a quick flash checked the fuse and it's ok part number for the drl...

I'm trying to make sense of the wiring but are their any guides to be found? Checked this forum but found nothing. I take it all I really need to do is make an extra connection to the battery?

Wife has a '12 GS-Sky that does not have fog lights from factory. Looks like the OEM Fogs kits are ~$250 + another ~$75 for the stalk with the added switch. Came across the below on ebay for ~$100, and am curious if anyone has experience with them? 2012 2013 Mazda 3 Mazda3 Bumper Driving Fog...

No pics yet, but this is a huge upgrade over the stock bulbs. Really adds a nice, professional touch to the lighting. I was prepared to remove and modify the housings in order to adjust the height of the beams, but it wasn't necessary. The channel the 10mm adjustment bolt sits in is already...

My front grille (and absorber) were recently damaged and I'm looking to replace them. When I was looking on ebay, I noticed the w/ fogs models are painted and the w/o fogs ones are not painted. I was thinking the painted ones look a little nicer and if I'm replacing it anyways, I might as well...

Bought replacement fog lights from CARiD - tried through the wheel well, but found that dropping the bumper was WAY too easy. Both sides out and back in within an hour. Sure looks better without the broken lenses. Next...

Anyone installed a well matched temperature, angel eye - projector fog set?

Anyone tried these?

Just received my XB fogs from TRS today. Their build quality is amazing and the light output is WIDE and AWESOME. If I leave them on factory position it will blind pedestrians a bit so I had to cut the tabs on the adjustment bolt and tilt them down a little (2/3 of the way down). Now they are...

Comes with harnesses, relays, and a switch but it didn't come with an install manual. I'm clueless here. Would anyone care to fill out my diagram below with some simple instructions?

The black plastic solid band at the top of the egg-crate part of the lower grill is cracked on my '08 HB (see photo) - can I replace the whole lower grille with the full egg-crate style grille of an '05 with no mods? And do the round style fogs of an '05 HB fit my '08, again with no mods? My...