Search Results for ‘filter’

I have a very light used (`10k miles) K&N Air filter that will fit stock car air boxes. I am sure everyone knows the benefits of these things. Its a cheap upgrade that can give you a slight boost on all around performance, and even if you're not interested in that you can save some money...

Is there a K&N Filter that fits and what part number would it be. Their website does not list this car yet Sent from my iPhone using Tapatalk

Send my 2015 2L skyactiv to workshop, had the oil filter change with Mazda B6Y1-14-302A (made in Japan), after came back only realize originally should use PE01-14-302B for skyactiv model my concern is, will there be any side effect or potentially harmful to engine? :|

Has anyone removed the charcoal filter above the air filter? There are so little posts in the Mazda community, but this in the Subaru Crosstrek community is a must do. The few posts I have read, talk about it improving sound and giving nominal gains in horsepower

Sold my 2017 Mazda3 and have some leftovers: [SOLD] 1. AEM 28-20480 DryFlow Air Filter that was installed for less than 5k miles. According to AEM website should fit almost any 2011+ mazda3, mazda6 or CX-5. Please check your fitting here. Clean and ready to use. $24 shipped. [SOLD] 2. OEM...

AEM 28-20480 DryFlow Air Filter that was installed for less than 5k miles. According to AEM website should fit almost any 2011+ mazda3, mazda6 or CX-5. Please check your fitting here. Clean and ready to use. $24 shipped.

So right now I am looking at the K&N CAI as one of several mods I plan on doing this year, but while researching different CAIs/SRIs, I learned a bit about the oiled filters used on CAIs. Most trouble (getting oil on sensors and causing a CEL) seems to take place after a cleaning and re-oiling...

Hi! I have a 2010 3 with the 2.0. Does this motor have a VVT filter screen and where exactly is it? I've seen very little about it anywhere. Ive gone to great lengths to clean up what was a sludgy motor but I get the pl1002 engine code....cam timing over retarded bank 1 from time to time. I...

I got tired of dealing with the cartridge style filters, so I did the conversion to spin-on. It's not hard at all. I got about $20 in this mod. Parts required: Everything for a standard oil change, plus 1L5G-6884-BA oil filter adapter (mine came from a Ford Fusion) LF02-14-342 gasket...

Hey all! I'm new to the mazda 3 community, so please take it easy on me! Anyway, I did an oil change on my 2012 Mazda 3 2.5L and I guess the parts store gave me the wrong oil filter (shorter than previous filter), but it fit and tightened up so I didn't think anything of it. I drove for less...

It seems that they released a new Cabin Filter for our cars: https://www.knfilters.com/search/product.aspx?prod=VF2056 https://www.amazon.com/gp/product/B07B2JQ3Q2/ref=ox_sc_saved_title_1?smid=ATVPDKIKX0DER&psc=1' Would be interesting to see if it has a noticeable performance over stock, what...

Hey Fam, I just posted a quick video showing you how to replace your old in cabin air filter. Mine was super dirty and even had a dead bee in it! (RIP) Hope it helps you guys! -G

Hey guys! I've been having an issue with my car for the past several months. It will come and go and sometimes happens back to back. I will be driving normally on either the freeway or city and the car hesitates and the engine seems to turn off but it still manages to accelerate at half half the...

Hi gang, pulled my airbox and resonator to add some gold heat tape to it, pulled the airbox lid and there is a second(?) airfilter in the lid? What is it for and do I need to keep it? Shawn

So my car was due for a new air filter, and I thought I'd give a kn a try. Long story short, my commute to work is about 30km of 100kmh highway driving and about 3 or 4 kind of stop and go. And I found im lucky to get 6.5 or closer to 7l/100km on a warmer day, where as I swear i could get closer...

hey does anyone know if the JBR dryflow filter fits on the Cobb SRI? i believe they are both 3in intakes, but i think the cobb intake has a larger flange..

so i just bought a 2008 3 with the NA 2.3 one thing i want to do to it is add an oil pressure and voltage gauge, probably in the a pillar, because that looks cool. im having a hard time finding a replacment pillar with 2 gauge pods, so i might just get the 3 pod one and throw an oil temp gauge...

I'm thinking of servicing my 2014 but I absolutely hate having to drop the pan to just change the filter. It seems to have a paper "oil strainer" aka rock catcher and I'm not sure whether to bother changing. Also RTV silicone having to cure for 24 hours and to replace all 16 bolts which Mazda...

Has anyone performed ATF fluid change and filter? I'm thinking of dropping the pan but I'm not sure if the gasket can be purchased or it has to be made with RTV of what kind.

who has installed an aftermarket air filter like K&N as shown below? was it straight forward? did it improve performance or consuming more fuel? share your pics also plz.