2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

endlinks

  1. FS:Rally Armor Mudflaps & Front Endlinks

    Mazda 3 Parts - Buy / Sell
    Selling my used Rally Armor Mudflaps and Racing Beat Front Adjustable Endlinks perfect for lowered cars. Both items came off my 2011 mazda 3 hatchback. Buyer pays for shipping Rally Armor comes with all hardware used for about 1 year and half - $75 obo Racing Beat Adjustable Endlinks used for...
  2. Struts + Lowering Springs required new endlinks?

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Hey guys, I lowered my car maybe 4 months ago with Koni Yellows struts and Road Magnet lowering springs. But recently I have been hearing some clunking sounds when going over any bump, big or small at lower speeds. Strangely when I go over small bumps at higher speeds, I do not hear any extra...
  3. Another thread on swaybars and endlinks

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    Hey guys, Starting to feel the modding itch for my m3. I was looking at RSB's and reading through the forums on them. I've learned (I think), that the stock end links are the 'weak link' and should be replaced with aftermarket if I'm doing a RSB. I have I think narrowed what I want down to the...
  4. FS: Rear Hardrace Adjustable Endlinks for Gen3s

    Mazda 3 Parts - Buy / Sell
    I am selling a set of rear adjustable endlinks from Hardrace that are new and in the original box. These fit the 2014+ Mazda 3 and Mazda 6. The 2012+ CX-5 and the 2016+ CX-9. https://www.hardraceusa.com/products/adjustable-stabilizer-link-range-125-164mm-ball-stud-m10-2pcs-set There is a...
  5. FS: Moog Endlinks for 2014+ Gen 3 Mazda 3

    Mazda 3 Parts - Buy / Sell
    The endlinks are new in box and have never been used. I had bought them as a potential short term fix for a problem I was having with a rear end sway bar, but ended up not needing them. I'd rather not return them as the seller did a great job getting them to me. Moog K750670 RPass Moog...
  6. GRP Endlinks Nut Specs?

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    Anyone know the diameter and thread pitch on the nuts used with these? I’m looking into mil-spec distorted thread locking nuts to replace them with. Tired of these coming loose and clunking/popping on the slightest suspension compression on either side.
  7. Front Endlinks

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Well my OEM endlinks are going bad and now I am looking to upgrade them. I am currently running BC Coilovers so thinking about getting adjustable front endlinks. I have been looking at the Racing Beat front endlinks and they seem to be decently priced as well as doing the job. Has anyone had...
  8. Best Endlinks for Eibach Springs and Progress RSB

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    Hi. I have a Eibach's springs set and Progress RSB (not instaled yet). I'm looking for a new and stronger set of endlinks for the rear. ADJUSTABLE SWAY BAR LINKS FOR MAZDA 3 BK 2004-2009 | eBay There is another option? Thanks.
  9. Moog Endlinks question

    2010-13 Mazdaspeed 3 Suspension & Handling
    I was curious for those who have purchased Moog rear endlinks, besides the fact they have a grease fitting, are they any really stronger than OEM endlinks? Curious to know if I should spend the extra $$$ for them.
  10. WTB: OEM MS3 Gen2 rear endlinks

    Mazdaspeed 3 Parts - Buy / Sell
    WTB: OEM MS3 Gen2 rear endlinks - PLEASE CLOSE & DELETE WTB: OEM MS3 Gen2 rear endlinks (M12 stud for the sway bar, M10 stud for the lower control arm)
  11. tripoint engineering rsb and endlinks

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Hey guys just had my tripoint engineering sway bar and endlinks installed ny my mechanic. Now when i go over bumps it sounds chunky almost as if my endlinks are bad. I had my mechanic look at it and he said everything is fine. Is the noise caused from upgrading rear end links from oem to...
  12. FS: 2012 stock 3i rear anti-roll bar and endlinks

    Mazda 3 Parts - Buy / Sell
    I have a stock rear anti-roll bar from a 3i hatch. Also includes stock endlinks. Both the bar and the endlinks have 8,588 miles on them and are for all intents and purposes flawless. Asking: $30 plus shipping for the bar itself $50 plus shipping for the endlinks $70 plus shipping for the...
  13. RSB End-links question

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    First of all, I'd like to thank CorkSport for this mod. It definitely made a huge difference in my otherwise stock 2012 Skyactiv. :D. I didn't take it on any crazy roads yet though because I wanted to make sure I'm doing this right. As you see of the picture the rubber won't sit flush with the...
  14. BC Coilovers, MS3 RSB + Endlinks, Corksport SRI 2.5L, 55W 4500k DDM HIDs

    Mazda 3 Parts - Buy / Sell
    BC Coilovers for Mazda3/MZ3. Around 5000 miles on them - $700 local. Will discuss shipping if needed. OEM Mazdaspeed3 Rear sway bar with endlinks (you need them for better RSB on Mazda3) - $130 local Corksport 2.5L SRI - $75 local DDM Tuning 55watt, 4500k HIDs for any non-techpackage...
  15. FS: CS 2.5L Intake, RM Springs 1.75, TP RSB + Endlinks + Moar!

    Buy / Sell / Trade
    Ok, Well I traded in my 2010 Mazda3 hatch for a 2012 Speed3 and I've been meaning to sell some parts I bought and no longer need/use. Sure Rear Motor Mount: $90.00 SOLD! Corksport Intake for the 2.5L $120.00 SOLD! RoadMagnet 1.75" Lowering Springs $150.00 Tripoint Engineering RSB $ 150.00 SOLD...
  16. Rear endlinks breaking?

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Has anyone ever had a problem with their rear endlinks breaking? I checked earlier today and the whole stud just sheared off the one on my passenger side. Does anyone have any idea why this would happen? I'm on 1.25" RM springs and a Racing Beat RSB. Pic related.
  17. D.I.Y. Adjustable Front Strut Endlinks

    2010-2013 Mazda 3 & Skyactiv How-To Guides
    All credit goes to rbradleymedmd on vwvortex Merely posting this for many that need adjustable endlinks for cheap $ VWVortex.com - DIY: Build your own Adjustable Front Sway Endlinks
  18. FS: 2010 MS3 OEM RSB & Endlinks

    Mazda 3 Parts - Buy / Sell
    This is the stock RSB off my MS3...recently replaced it with a Tri-Point bar so I have no need for this and no garage. Please take it off my hand. 23k miles on it...Asking $100 OBO
  19. Rear Endlinks

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    I keep breaking my rear endlinks. Is there anyone that makes a better/stronger one? I'm not finding much.
  20. Replacement endlinks

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    so i broke one of my front endlinks. damn these are pieces of crap. i need to fix this, where can you get them? i dont wanna spend alot. so i kinda just want a oem replacement
Top