2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

endlink

  1. GRP Endlink Failure

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    The thing broke on me...Noticed some clunking and checked my suspension.. Driver side rear endlink hanging loose on top... No unusual driving or reason for it...it just broke. Luckily, I had some Moog endlinks and put those on in the rear. I now need to check the fronts to see how they are...
  2. MS3 Rear Sway bar Endlink same as MZ3?

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    I am looking to do a rear sway bar swap on my 2011 MZ3 Hatch. I like the idea of putting the Ms3 bar on the car but I know that the endlinks are larger bolts then the Mz3 on Gen1s, how about on gen2? would i need to get new endlinks or shim it, or will it straight swap?
  3. Proper Endlink Install - to avoid 99% of "clunking" problems

    2014-2018 Mazda 3 Skyactiv Suspension & Handling
    This is from EvoXforum and thought it would be beneficial to share it here. I didn't write it myself. Somebody else put this great info together. "99% of clunking problem are probably your endlinks 1. If you got an aftermarket swaybar, but are still using stock endlinks - they're probably...
  4. Mazdaspeed 3 rear sway end-link onto normal 3?

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    I know that the stud for the Mazdaspeed 3 end-link at the sway bar side is larger (12 mm versus 10 mm for the normal 3). However, is the stud on the control arm side larger as well or is it the same? In otherwords, if I had a Mazdaspeed 3 rear sway complete with Mazdaspeed end-links, can I...
  5. Rear endlinks breaking?

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    Has anyone ever had a problem with their rear endlinks breaking? I checked earlier today and the whole stud just sheared off the one on my passenger side. Does anyone have any idea why this would happen? I'm on 1.25" RM springs and a Racing Beat RSB. Pic related.
  6. Bottom front endlink bolt

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    what dirrection should i be turning. i figured it would be right since its on the oposite direction as the top. and is there a easier way to get this damn bolt off. its on there way tight
  7. RSB- Endlink problem

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    First off, they were very loose. Guess the locktight wasnt put on correctly (I'll fix that). Most importantly......the right endlink was "bent". Not actually bent...but the link did not form a 90 degree angle like the left one. Any suggestions? It doesnt look right. I called corksport and...
  8. Aftermarket endlink help asap please

    2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    The mechanic who installed these is leaving this weekend for SEMA so if there is a prblm I'd like to get it fixed soon. He installed a Tri-point sway bar and Tri-Point endlinks yesterday. I watched him do it, and as far as I could tell, he followed the instructions and loc-tited everything...
Top