2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

41-59 of 97 Results
  1. 2014-2018 Mazda 3 Skyactiv How-To Guides
    If you're like me and can't stand the heads up display then follow these quick directions and disable it for good! 1) Pull steering wheel column all the way out and down. 2) pull instrument cluster bezel towards you. (snaps out of place)...
  2. 2014-2018 Mazda 3 Skyactiv Audio & Electronics
    By using ODB2 Reader + Arduino Nano + 4-digit LED display, I'm starting to build my own HUD today. Here is some very first result, need to improve more but welcome all suggestion
  3. 2010-2013 Mazda 3 & Skyactiv How-To Guides
    I apologize in advance for not taking nice pictures, because in the moment I honestly had zero idea if this would work! Well it did, so here's my best shot at explaining how to retrofit your factory airbag into a racing steering wheel. This is NOT a full DIY tutorial on replacing your steering...
  4. 2010-2013 Mazda 3 & Skyactiv Suspension & Handling
    I know I have touched on this topic before, but has anyone looked into doing a 2 to 3 inch lift on one them there mazda 3's?
  5. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    can anyone tell me if I can fit lights to the front of the lower bumper thats connected to the main head lights? probably the same brightness and color of the main ones. in case you cant tell, im very new to DIY mods.
  6. 2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Has anyone done their own angel eyes on gen 3s? I've got a few questions and need to really do my research before I try this. Recommended brand/type of angel eyes? Diameter of ring? Most importantly, how to wire it? (with pics preferably)
  7. 2014-2018 Mazda 3 Skyactiv How-To Guides
    Greetings sir! Here is my first ever DIY project on my Mazda 3. Just want to share for you DIY enthusiasts like me. Geronimo! Materials used: a. VHT Nite-Shade Red Amber b. Bosny Yamaha Orange c. Clear gloss (optional) d. Masking tapes (half inched and 1/4 inched thick) e. Paper f. Car Wax...
  8. 2014-2018 Mazda 3 Skyactiv How-To Guides
    Easy guide to dip or wrap your front emblem. Prepping the area to dip, finished taping off the entire area to be dipped only to realize that the emblem moves around in the front. So I figured it'd prolly be best to dip it off the car so I went about trying to look for a way to remove it...
  9. 2014-2018 Mazda 3 Skyactiv Audio & Electronics
    Hey guys! So my previous post was about the pinout of the start button (http://mazda3revolution.com/forums/2014-mazda-3-skyactiv-audio-electronics/76650-push-start-button-pinout.html) The reason i went about doing that was to create a remote start system for my car that would be as...
  10. 2014-2018 Mazda 3 Skyactiv How-To Guides
    Sick of stuff rolling around in your trunk? I was! What's under these covers? I bet the factory net clips attach there: Pop off the little rectangular covers by pulling out the center pin first: I had these 66458 D-rings from Harbor Freight: All the parts. A lighter-duty D-ring...
  11. 2014-2018 Mazda 3 Skyactiv How-To Guides
    I just want to share my DIY plate relocation mount which costs less than $30 for my 2014 Mazda 3 sedan and does not require drilling of holes since, like everyone else, I thought that the placement of the plate seemed out of place. These are the materials you need: 1. Plate Mount – From Ebay...
  12. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    I did a whole lot of searching, trying to decide whether or not to go with an OEM footwell lighting kit or to go with an aftermarket one. I found out that the OEM add-on kit was just continuous power with a switch and was either always on or always off. I did not want them on while driving, so I...
  13. 2014-2018 Mazda 3 Skyactiv How-To Guides
    Vehicle: 2014 Mazda 3 GS (Canadian Mid-Trim) Mod: Eibach Pro Kit lowering springs Time: 3 hours (a huge portion of that time was dedicated to taking photos and swatting away swarms of mosquitoes). Difficulty: 2.5/5 (as long as you have the right tools) Tools Needed: Something to lift the car...
  14. 2010-2013 Mazda 3 Engine and Performance
    CS SRI Growling at 2k vs 3k a problem? I made DIY box for my CS SRI for 10 bucks. I didnt want to spend 100bucks on the cs box cus it seems like they didnt do much engineering. one reason was the stock air ducts being ignore. second was that huge opening on the side, hot air rises, so the...
  15. 2014-2018 Mazda 3 Skyactiv Discussion
    When it comes to maintenance and repairs, where do you take your Mazda 3? The stealership I mean dealership? DIY (do it yourself), or a speedshop/import shop? And why? I am always weary of the dealership so when it comes to maintenance and repairs I don't know how and or have the tools/lift to...
  16. 2010-2013 Mazda 3 & Skyactiv How-To Guides
    First and foremost let me start by saying please please PLEASE make sure you are practicing better safety precautions than I did in this tutorial. I have experience using these tools and thus felt safe with the way I handled them but nonetheless please follow correct safety precautions with...
  17. 2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Im thinking about getting these to replace the cloth seats in my 2010 sedan. Does anyone know if they will bolt up? 04 MAZDA 3 BLACK LEATHER heated BUCKET SEATS seat FRONT AND REAR - Oshawa / Durham Region Other Parts, Accessories For Sale - Kijiji Oshawa / Durham Region Canada.
  18. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    Hey everybody! So this is my first post, please bear with me. Anyway, I build an intake for my 2014 mazda3 touring because I know mazda engines have a very loud induction noise which I really like and I wanted to be able to hear it. So I bought an OEM airbox and cut the cylindrical end off...
  19. 2014-2018 Mazda 3 Skyactiv How-To Guides
    Vehicle: 2014 Mazda 3 Sport GS (Canadian mid-level trim) Time: ~ 1.5 hours Tools: Wire Crimper, Cutters, Electrical Tape, Socket wrench, 10mm Socket, Tape Measure, Impact Gun, 13mm Impact Socket, Dielectric Grease Hardware: 12 AWG wire, 2 x grounding rings (3/8"), 1 x male connector (1/4"), 4 x...
41-59 of 97 Results
Top