2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner


  1. Help can I plasti dip this?

    2014-2018 Mazda 3 Skyactiv How-To Guides
    Guys, can I plasti dip this? It has sensors right? thanks for the help!
  2. 2015 mazda 3 front grill emblem - tapr or remove?

    Interior / Exterior
    2015 Mazda 3 isport - I've gone through the videos and threads about plasti-dip the emblems and it seems split over just taping around it the front grill emblem OR take it out and paint it separately. I'm nervous to take it out and break it. If I pop the hood, does it help to unscrew and take...
  3. plasti dip project.

    2010-2013 Mazda 3 & Skyactiv Wheels and Tires
    Finally got around to dipping my wheels. Never been really good at spray painting but i gave it a try and it's not too bad. Not perfect but definitely a learning experience. I'm thinking about leaving it on for a few months then maybe trying a different color. Maybe a gold color?? I spend less...
  4. white dip

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Has anyone used the white plasti-dip and then pearlizer on their 3 ? if so how did it come out and is it close to the CWP paint ? thanks in advance.:smile2:
  5. Dip new wheels or not

    2014-2018 Mazda 3 Skyactiv Wheels and Tires
    Just picked up a set of 1st gen ms3 wheels. I really like them a lot, and its a big upgrade from the original 16inch stockers. Now im torn whether to dip them or not. I had my stocks dipped and it looked ok, but im kind of bored of the black look, and im liking the silver for now. Just not sure...
  6. Plasti Dip After Removed Bumper

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Hi All, Today I wanted a more professional way to paint my U in the Grill. So I used these directions to take off my bumper 2014 Mazda 3 Bumper Removal Then I was able to set the bumper down and figure out how to take the U off. if you have enough knowledge to follow the directions then i...
  7. Plasti dip bra and graphics

    2010-13 Mazdaspeed 3 Appearance & Interior
    Hi - I've not used Plasti-Dip , but have seen a couple of cars that it was used on. Anyway, I have a 2010 Hatch and driving on the freeway (I am in Denver) I'am picking up a few front end chips. I looked at Bras and had some on a few cars back in the "Old Days" and really did not like how they...
  8. Plasti Dip Anyone?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Anyone used Plasti Dip for a whole car conversion? I am really entertaining this for my 2013 M3 5dr... as I really enjoy bright Neon Green or some crazy Alien pearl colors... but it's pretty rough - the glossifier makes it glossy, but does it make it smooth?
  9. White with black plasti dip wheels

    2014-2018 Mazda 3 Skyactiv Wheels and Tires
    Does anyone have pictures of the their white sedan with place plasti dipped stock wheels. Possibly the touring ones? Debating if I want to do it.
  10. Quick question about plasti dip wheels

    2010-2013 Mazda 3 & Skyactiv Wheels and Tires
    So I'm thinking about plasti dipping my stock wheels but I heard sometimes the area where the nuts bolt in can get messed up and lift the plasti dip. What do you do to prevent that from happening ? Do you avoid plasti dipping around that area ?
  11. Plasti Dip Fun

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    So I just went out and got a couple cans of plasti dip and thought id mess around because i know its not permanent, so here are some pics and ideas of what you can do with it Rims Engine Cover Front Fascia Skyactiv Logo Front and rear mazda logo and the mazda 3 logo
  12. Matte white plasti dip whole car?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Im considering plastidipping my 2011 mazda 3 sedan matte white except for the roof which I'm going to leave black. What do you guys think?
  13. dip emblems lime green yes or no?

    2010-2013 Mazda 3 & Skyactiv Discussion
    Need some onions I have a blue (41B) second gen 3 thinking of dipping my emblems. I want to do lime green since my calipers are that color thoughts? Or would that look weird?
  14. Plasti dip suggestion

    2010-13 Mazdaspeed 3 Appearance & Interior
    So I wanna dip my car lol I can't decide on colors. I'm thinking of doing wheels and emblems and possibly the front bumper piece. I thought about doing black but that seems a little played out. What about blue. Has anyone done blue wheels, emblems and bumper?
  15. Plasti Dip Valance

    2010-13 Mazdaspeed 3 News & Discussion
    Hey all, I just plati-dipped my rear valance and it looks awesome. Even though it looks sweet, I noticed one issue. At some point, I accidentally touched it with my thumb so now there's a thumb print. It looks perfect and this was my second attempt as I had to peel it the first time. Is there a...
  16. Anthracite Plasti Dip

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    Just had to share! Happy with their Anthracite color (5x Anthracite 2x Glossifier)
  17. a night to dip

    2014-2018 Mazda 3 Skyactiv Appearance & Interior
    So me and some coworkers want to plasti dip our rims so here we are at 3 am
  18. Plasti Dip, buy rims, or just forget it?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    Hey guys, I was just curious what you all thought about ways to change the look wheels on the 2010 Mazda 3 hatch. Is worth the time to plasti-dip? Is it better to spend the money on new rims? Or should I just leave the stock alloy rims on there? Any suggestions are greatly appreciated. Thanks...
  19. Plasti dip smoke

    2010-2013 Mazda 3 & Skyactiv Discussion
    Can anyone tell me if is worth applying plasti dip in tail lights ?? And it can affect when it comes to inspection ?? I live in tx
  20. "Furry" plasti dip on my wheels?

    2010-2013 Mazda 3 & Skyactiv Appearance & Interior
    So ive sprayed plasti dip on my emblems and they came out smooth and have lasted over a year. I just did my wheels over the weekend and im horribly disappointed with how they came out. About seven layers deep and i waited 20-30 mins between coats. I only realized that the soap i used to clean...