I have a CP-E Rear Engine mount for sale. This will help with the planting power to the ground instead of everything being lifted up. I am selling because I no longer have my 2013 Mazdaspeed 3. I am selling for $105.00 Shipped that includes paypal fees and shipping.
Paypal is [email protected]
I have a few performance parts available for the 2.3l mazda engine..
-CPE stainless steel turbo manifold
-CPE cold air intake
-HP fuel pump upgrade kit
-stainless brakelines for CX-7 (goodrich)
All items are new.. My cx-7 was totaled before I could install
Anyone know if the CPE Triton Exhaust will fit a 2011 mazda 3 2.5? I've been searching around to see if it will fit but haven't been able to find anything. I know its specifically for the speed 3, but found a decent price on it, so if it fits I may jump on it.
Sadly I totaled my 2007 mazdaspeed3 this past Friday, managed to grab these parts off of it before selling it to the scrapyard for nearly nothing :(
I have two items (in this thread, have h & r lowering springs in an older thread):
First up is a Turbo XS hybrid BOV, in excellent condition...
fixing to pull the trigger on intake and t.i.p.
i have seen CAI,SRI,WIDE PATH,3IN and others...
wanting the best first time around so later i want be ordering a nother one to keep up the the mod bug that has just bitten me...
have the access port and hpfp now time to keep going....
Wondering if anyone on here has installed the Custom Performance Engineering Stage 1 Rear Motor mount on a 2.5L Mz3? I called CP-E and they have not done a fit test on that specific model yet so they couldn't confirm if it would fit. They did say that if it didn't fit, they would gladly give me...
Guys just wondering, what material would cause more vibes urethane or rubber used on cp-e?
I'm ready to pull the plug on the purchase but my last item is being debated between cp-e stage 2 or corksport RMM. I read so many great reviews about corksport rmm that now I'm thinking which should I...
Good afternoon guys
I wanted some feedback from any member that has had experience with these RMM. I read they tend to have less vibes. So if anybody of you can give me some insight, I would appreciate it. I daily drive to much and I want the less vibes possible. I understand is a give and take...
Scored a used CP-E triton cat-back and it came with CS hangers too and damn that thing is loud! So my setup currently I have a Cobb downpipe and test pipe (one piece from cobb) and CP-E catback now. I had to buy new bolts to mate up the test pipe to mid-pipe but that's it. I don't have any video...
ALL PRICES SHIPPED CONUS:
1993 Rays GTP 2pc 5x114.3 17x8+43 17x9+23 NO TIRES SHIPPED.
CPe RMM 75 Duro
EBC 3GD Slotted and Dimpled rotors, under 2000 miles. For NA Mazda 3
EBC Yellow FRONT pads, also under 2k miles for NA Mazda 3
I have for sale
- New Cpe rear motor mount for $125 shipped
spec 60 durometer stage 1
fits all mazdaspeed 3
- Used Cpe turbo intel pipe for $165 shipped
spec 3 inches to stock turbo
fits all mazdaspeed 3 / 6
- Used Magnaflow Catback Exhaust for $500 shipped
fits mazdaspeed 3 gen 2...
Good evening. I plan this weekend to install the CPE downpipe I had in my 2010 onto my 2013. In looking at it today, I saw a bit of carbon build up right after the cat. Should I clean this out or leave it as is? If clean out is the way to go, any suggestions on what to use to clean it out? Any...