2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner
corksport
1-20 of 500 Results
Advanced
  1. 2019+ Mazda 3 Recalls / TSB / SSB
    Selling my 80 mm catback exhaust for 3rd gen mazda 3 sedan. I had an 18 inch vibrant resonator welded in which really helped with the drone. Also selling corksport air intake for the 2.5 and cold air box. Approximately 14k miles on all parts. 18k miles on car in total Local in nyc. Can meet...
  2. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    So I bought a Corksport axle back exhaust for my 15 mazda 3 hatchback back in late March. Corksport said they were out of stock 😞. I went with them because the sound wasn't too "ricey" and seemed just right. In the meantime, I've seen some vids and posts about the Ultimate Racing and Racing Beat...
  3. 2010-2013 Mazda 3 Engine and Performance
    I’m kind of a newbie when it comes to exhaust. I’ve read a few posts about these parts and I’m looking for some clarification because I can’t seem to find the answers. I have a 2010 Mazda3 S 2.5L (sedan). I read on a different post that the MSDS headers requires cutting and that it will delete...
  4. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    Hello, I've been looking at ways to increase the sound of my car while not breaking the bank and keeping my car legal. I found the OBX Stainless Catback Exhaust For Mazda3 2.5L Sedan. I found out that the inner diameter of the pipes are larger than stock. I was wondering if any of you guys have...
  5. Mazda 3 Parts - Buy / Sell
    Just bought a new to me 2018 Mazda 3 Hatch, it came with some upgrades including the 80mm Corksport Catback exhaust (midpipe and axle-back). Sounds great, love the power gain, but it is my wifes car and she says its just a bit too loud (although I think its great). the sound is great, a lot of...
  6. 2004-2009 Mazda3 Discussion
    Hey all how’s it going? I’ve been looking into getting some solid shifter bushings and thought might as well get a short throw shifter too. Problem is, I cant find any haha. It seems people only make short shift plates for the 1st gen's now. I think I'm a little late too cause it seems all...
  7. Mazda 3 Parts - Buy / Sell
    Only interested in Corksport 80mm / 60mm or Borla axelback.
  8. Mazda 3 Parts - Buy / Sell
    https://corksport.com/2014-mazda-3-cat-back-exhaust-sedan-hatchback.html For sale is my 2014-2018 Corksport Cat-Back Exhaust for the sedan. I love this exhaust but I'm trading in the car soon. I've had it for approximately 3 years and have had custom mounting brackets made because the old...
  9. Mazda 3 Parts - Buy / Sell
    Hi everyone, This is brand new in the box. Nothing has been unpackaged. Unfortunately, I ended up selling my Mazda3 before I had a chance to install it. From Corksport it's $120 +shipping ($15). I'm selling this for $100 shipped. Firm Pricing, Paypal only. Thanks...
  10. 2004-2009 Mazda 3 Performance & Mods
    I bought a 2007 Mazda 3 Grand touring Hatchback with a 2.3L with the 5 speed manual transmission. Its in pretty nice shape on inside and the outside has some chips, scratches and dings but overall its a fairly nice car. It has 182K miles but as far as the engine, clutch and trans it shifts well...
  11. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    Anyone on here have the CS 80mm catback? Better yet, has anyone gone from the OG 60mm to the 80mm? I'm trying to decide between the two. I'd like something that's a bit louder when I put the pedal down, but that I can still have a conversation in while cruising down the highway. I like the tone...
  12. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    So I was wondering for price if it is better to get a custom exhaust done compared to buying one such as the corksport and getting it installed. Also so I could tier my exhaust to more of what I want (more aggressive sounding than the corksport but not too aggressive like a straight pipe). Is...
  13. 2014-2018 Mazda 3 Skyactiv Discussion
    Hey all, it's been a while. Been really busy, but I'm going to start throwing some more mods at my car. Just ordered the RMM and looking forward to a more raw feel. There are two parts I'm eyeing at the moment; the CS Pulley, and the transmission mount. Does anyone have any experience with...
  14. 2010-2013 Mazda 3 & Skyactiv Discussion
    Hey guys. Pretty well in desperate need of help at this point. I installed the entire corksport exhaust system on my car, car as said in title, and pretty much nothing but issues since day 1. I had a CEL P013A, that has been cleared and hasn't come up again. Now my new issue with the car is shes...
  15. Mazda 3 Parts - Buy / Sell
    This is a full cat-back with race pipe from Corksport. Installed less than 100mi, looks amazing. Why selling? She wanted an exhaust; she doesn't want an exhaust. The exhaust sounds amazing - nice low growl at take-off and rumble until 1.5-2k or so. Mellows out at cruise so zero drone. I would...
  16. 2014-2018 Mazda 3 Skyactiv Engine and Performance
    I read this morning about an 80mm Corksport exhaust in their blog, the blog mentioned turbo kit and race headers in the works. My question Is it better then the 60.5 exhaust for the future turbo. I don't want the exhaust to be too loud with a 80mm.. Sent from my SM-N960U using Tapatalk
  17. Mazda 3 Parts - Buy / Sell
    I am Selling my car in the near future. Looking to trade my aftermarket Corksport cat back exhaust system with no racepipe for your stock 2011 mazda3 2.5 hatch exhaust. Local only in southern California. Since This is my only exhaust, we will need to meet somewhere so we can swap the exhaust...
  18. New Member Introduction & Forum News/Guide
    This question has probably been brought up before but has anyone had CorkSport RMM installed and know from experience how the NVH feels on the car? Is it worth getting as a daily driver (50 miles a day)? Thank you in advanced.
  19. 2012-2013 Mazda 3 Skyactiv Engine and Performance
    At corksport DOT com/corksport-skyactiv-aluminum-oil-catch-can.html (can't post links yet) I see that this would grab anything heavier than air blowing through the PCV valve. Has anybody used this? Have they noticed any improvement in their oil after a change? Why have I never seen anything...
1-20 of 500 Results
Top