Search Results for ‘connector’

Hey Everyone, Been using the site for reference for a while now, but first post. I have an 09 Mazda 3 Hatchback and I recently noticed the infamous burnt red lens in the tail light. I've been searching for some replacements and finally settled on these due to cost and the LEDs not having an...

I just finished reinstalling the engine in my 2004 Mazda 3S and noticed this connector above the radiator cooling fan (see picture). I can’t seem to find a mating connector. What should connect here? Thanks for the help. Ed

I purchased my car and the seat belt was fixed (not the correct way) and the mechanic put a resistor on the harness and cut the plug that comes from the harness to the seat belt airbag... this was done before I purchased the car, so now I want to purchase a new seat belt but I dont have the...

Hi, This hose connector on the picture broke. I can't find the part locally. (mazda dealer does not have it) I would like to know the part name or a link to buy it online and ship it overseas (I am not in the USA) Thanks

I had a run in with a golden retriever...front right smashed. I have sourced all parts to repair, but I'm having trouble finding the connector for the amber turn signal (above the fog). Dealership says the only way to get it is to order the complete lamp with wiring harness. Does anyone know...

Has anyone tried to put H11 LED foglights in? I got some but when I tried to install them they wouldn’t clip together with the connector like the stock halogens. The LED’s worked but they wouldn’t clip. I was hesitant to leave them in because they (LED’s) wouldn’t clip together. Thoughts? Ideas?

Hi everyone! I'm new here so be easy on me haha. Doing some inspection on my 2014 Mazda 3 Hatchback I see a white connector just on top of the OBD port. Does anyone know what is it for? take a look at the picture.

I recently hit a big chunk of ice and broke my rad, grabbed a replacement and in the process of getting it out. I got the grill and top piece above the grill off now my only problem right now is removing the electrical connectors for the fans, if anyone knows how help would be greatly...

!!! ----

THIS IS AUDIO VIDEO connector ? some times when I put in reverse quickly is not visible the MAZDA warning line " PLEASE CHECK SORROUNDING FOR SAFETY " . anyone try to put video signal for camera directly in these pins ? see picture thanks SOMEONE KNOWS WHAT SIGNAL IS SENT TO PIN? 12V GND...

I just did a radiator support frame swap on my 2009 mazda 3 5-door. I got it all buttoned up when I noticed that there's a 2-wire connector that I didn't reconnect, clipped just behind the top of the radiator support frame branching off the front wiring harness, to the driver's side of the...

Hey guys, i think to solve all videos/gps problems why not find a way to install chromcast to our car and everything should be solved, like this video: https://www.youtube.com/watch?v=vgTaAwB951A what do you think ?

Similar to this: Pac-Audio.com Product Details | iPod Integration for your car and More by Pac-Audio - Connecting you to the future Plugs right into the back of the factory head unit and gives you the necessary RCA plugs with needing to mess around with soldering wires and all that. Which...

Just found this on Github: https://github.com/jmgao/m3-toolchain https://github.com/jmgao/mazda-connector Just did a quick search on the forums and couldn't find anything, but shouldn't the toolchain be extremely helpful?

Would it be possible to make a plug and socket that would accept the input connector at the Bose amp (using the socket) and then make RCA outs as well as mate to the same kind of plug to continue into the Bose amp? It's a 16-pin connector (connector # 0920-322A). Let me know if this doesn't...

Hi, please i need a help, where i can buy one clips moulding of C16 connector ? thank you

I need some help identifying this connector. I found the part, however they don't tell you what type of connector that is. It's for the reverse light bulb and plugs into the 7440 socket. No 18 on this sheet: 2014 Mazda 6 FRONT & REAR WIRING HARNESSES Thx, Andy

Hey Everyone, This is my first post - so forgive me for any offenses! I just returned from some maintenance service (oil change, tire rotation) at the dealership and decided to look under the hood. I always check the oil dipstick before and after an oil change as well as to make sure that the...

First time doing any audio work and i already regret trying to upgrade over the stock radio (car audio is not my thing). While in the process of installing my new head unit, i yanked too hard on the radio connector and as a result, one the of the wires came loose from the pin. There is no way to...

Hi all, I've got a 2012 Skyactiv Hatc that I installed an iPod kit the other day. As part of that campaign, I noticed the wiring harness and connector for the 3.5mm aux input jack that's in the armrest. What strikes me as strange is the number of wires going into it (see attachment). Last...